Oscillating Bobbin Sander: Difference between revisions
bare bones, scan of manual to be added |
No edit summary |
||
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Tool | {{Tool | ||
|image=File: | |image=File:Oscilating_Bobin_Sander.png | ||
|manufacturer=Axminster Craft | |manufacturer=Axminster Craft | ||
|model=Earlier version of [https://www.axminster.co.uk/axminster-craft-ac140oss-bobbin-sander-105109 ac140oss] | |model=Earlier version of [https://www.axminster.co.uk/axminster-craft-ac140oss-bobbin-sander-105109 ac140oss] | ||
| Line 12: | Line 11: | ||
|defunctdate= | |defunctdate= | ||
}} | }} | ||
==What does it do== | ==What does it do== | ||
The Oscillating Bobin Sander is intended, but not limited to, sanding an internal radius on timber or other compatible materials. | The Oscillating Bobin Sander is intended for, but not limited to, sanding an internal radius on timber or other compatible materials. | ||
The spindle rotates and oscillates up and down, it is possible to tilt that table to achieve a bevelled edge profile on your work. | The spindle rotates and oscillates up and down, it is possible to tilt that table to achieve a bevelled edge profile on your work. | ||
| Line 22: | Line 20: | ||
The on-switch is located on the front, under the off switch flap, undo the clip and lift the flap. | The on-switch is located on the front, under the off switch flap, undo the clip and lift the flap. | ||
Instructions on how to use and maintain the tool are in the manual attached to the wall. | Instructions on how to use and maintain the tool are in the manual attached to the wall. | ||
The spindles can be changed to | The spindles can be changed to accommodate different radius profiles | ||
[[File:Oscilating Bobin Sander On.png|200px|frameless]] | |||
==Use dust extraction when sanding== | ==Use dust extraction when sanding== | ||
At the moment of writing the unit does not have a dedicated extraction system, make sure the exhaust is connected at the back of the table to the extraction system currently shared with other equipment (the hose should just pull off and connect) | At the moment of writing the unit does not have a dedicated extraction system, make sure the exhaust is connected at the back of the table to the extraction system currently shared with other equipment (the hose should just pull off and connect) | ||
==Links to YouTube and instructional stuff== | |||
* [https://www.canadianwoodworking.com/tools/oscillating-spindle-sanders Canadian woodworking article] | |||
* [https://www.youtube.com/watch?v=zP9SikPMKgc Nicholas Kosloski YouTube] | |||
=to do= | |||
upload pdf scan of the manual, link to instructional stuff | |||
Latest revision as of 07:09, 11 June 2019
| Oscillating Bobbin Sander | |
|---|---|
 | |
| Manufacturer | Axminster Craft |
| Model | Earlier version of ac140oss |
| Obtained | Hackspace Owned (May 2019) |
| Location | Dusty Area |
| Team | Woodworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
What does it do
The Oscillating Bobin Sander is intended for, but not limited to, sanding an internal radius on timber or other compatible materials. The spindle rotates and oscillates up and down, it is possible to tilt that table to achieve a bevelled edge profile on your work.
How to use it
The manual is pinned to the wall behind the device. The on-switch is located on the front, under the off switch flap, undo the clip and lift the flap. Instructions on how to use and maintain the tool are in the manual attached to the wall. The spindles can be changed to accommodate different radius profiles
Use dust extraction when sanding
At the moment of writing the unit does not have a dedicated extraction system, make sure the exhaust is connected at the back of the table to the extraction system currently shared with other equipment (the hose should just pull off and connect)
Links to YouTube and instructional stuff
to do
upload pdf scan of the manual, link to instructional stuff