Fantasy Football Trophy

Fantasy Football Trophy
Primary Contact	Danspencer101
Created	2019/08/16
Completed	2019/08/30
Dormant
Version
Members
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	Complete
Type	Members Project
Live Status

A quick and dirty project I did for some friends at work. Turned out being a little harder than I thought it would've due to difficulties painting the design.

Attempt 1

I used Superbox CNC Router to cut the design into the block before painting. This was disastrous as I couldn't fill the design with paint after I'd sprayed it purple. Ended up being very messy so I scrapped it.

• 
  Cutting the design with CNC Machine
• 
  Messy paint job as it was very difficult to back fill the design

Attempt 2

Laser Engraving the mask

Attempt two used the Laser Cutter. I started by spraying the entire block purple and applied a laser mask to the top face once it had dried.

1. I then used the laser cutter to engrave the mask away, leaving a gap where the design needed to go.
2. I then sprayed over the mask with white paint.
3. I removed the mask to achieve the clean finish that I was looking for.

•