SLA Printer Pledge: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(78 intermediate revisions by 17 users not shown)
Line 1: Line 1:
[https://www.monoprice.uk/products/mp-sla-3dprinter?variant=28384533413975&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQjwo7foBRD8ARIsAHTy2wl0ckFOIWuenrWPAXcu-8U9XIbyVjbpwyqS6UNLKPVzQNBekOSb3FYaAvY8EALw_wcB Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer]
{{note|This pledge drive was successful, see [[Anycubic Photon]]}}


Total cost: £249.00
 
 
[[Image:monoprice.jpg|300px|thumb|Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer]]
Pledge drive to buy a [https://www.monoprice.uk/products/mp-sla-3dprinter Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer] (£249) and parts for wash/cure stations (~£30)
 
Total cost: £279.00
 
This [[Wikipedia:Stereolithography|SLA]] 3D printer provides a higher resolution output than is possible with the [[3D Printer|Ultimaker Original+]] (which is filament based). See specs below.


===Stretch Goal/Additional Costs===
===Stretch Goal/Additional Costs===
[[File:ANYCUBIC-Photon-SLA-DLP-3D-Printer-UV-Resin.jpg|thumb|photon printer]]
Printed parts need to be washed. They then need to be cured, preferably in an enclosed environment with a powered filter. Costs estimated at £30, some parts may already be available.
Printed parts need to be washed. They then need to be cured, preferably in an enclosed environment with a powered filter. Costs estimated at £30, some parts may already be available.


Resin costs: £20/500ml, plus wastage
Resin costs: £20/500ml, plus wastage
If we have sufficient funds we will buy the [[Anycubic Photon]] SLA 3D printer as it has a better spec and support network, see [https://all3dp.com/1/anycubic-photon-3d-printer-review/ review].


== List of pledges ==
== List of pledges ==
Line 21: Line 31:
! Method Paid
! Method Paid
|-
|-
| [[User:layjet|James Taylor]] || £15 || No || -
| [[User:layjet|James Taylor]] || £25 || Yes || SLAPRINTER-JT (confirmed)
|-
| [[User:Monstertruckglue|Andrew Walters]] || £30 || Yes ||SLAPRINTER-AW  (confirmed)
|-
| [[User:daves|David Spence]] || £30 || Yes || cash(*)
|-
| Lee Hutchison || £30 || Yes || SLAPRINTER-LH  (confirmed)
|-
| [[User:Jon|Jon H]] || £10 || Yes || SLAPRINTER-JH
|-
| [[User:Danspencer101|Dan S]] || £10 || Yes || Bank Transfer  (confirmed)
|-
|-
| [[User:Monstertruckglue|Andrew Walters]] || £15 || No || -
| [[User:iandickinson|Ian D]] || £15 || Yes || Bank Transfer  (confirmed)
|-
|-
| [[User:username|Name]] || £0 || No || -
| Ed Podgorski (see talk) || £15 || Yes || Cash in safe
|-
|-
| User || £0 || No || -
| Alex Sokolov || £20 || Yes || SLAPRINTER-AS (confirmed)
|-
| [[User:moop|Steve Barnett]] || £20 || Yes || SLAPRINTER-SB  (confirmed)
|-
| [[User:Fowkc|James Fowkes]] || £20 || No || -
|-
| [[User:Miller|Paul Leivers]] || £20 || Yes|| SLAPRINTER-PL  (confirmed)
|-
| [[User:LSWRArt|Arthur Moore]] || £10 || Yes || Transfer  (confirmed)
|-
| [https://groups.google.com/d/msg/nottinghack/HaIj_roLIPE/1cV2UV56AwAJ Charlie Cole] || £10 || Yes || SLAPRINTER-CC  (confirmed)
|-
| [https://groups.google.com/d/msg/nottinghack/HaIj_roLIPE/xCWcMyyJAwAJ Maxima Bunting] || £10 || No || -
|-
| [[User:McMullet|Sam Roberts]] || £10 || Yes || BACS ref SLAPRINTER-SR  (confirmed)
|-
| Bob Wood || £10 || Yes || BACS  (confirmed)
|-
| Betty Ching  || £10 || Yes || - Xfer (confirmed)
|-
| Eugen Juravliov || £15 || Yes || -Cash in box
|-
| [[User:Seti118|Ax Smith-Laffin]] || £10 || Yes || Transfer (confirmed)
|}   
|}   


{{#widget:PledgeTracker|pledgeGoal=249}}
(*) cash will be used to purchase items directly(recipts supplied)(Dave s)


Note: Please try to make payment asap once target is met.
{{#widget:PledgeTracker|pledgeGoal=279}}
 
Note: Please try to make payment asap once target is met. Target has been met. Please start paying.
Payment can be made by:
* bank transfer (details on HMS)
* cash to a Trustee.
* cash posted into the safe next to the money gobbler(slot on top) please put in envelope with your name,pledge amount and "for 3d printer pledge drive".
 
==Further discussion==
 
For discussion see:
* [https://nottinghack.slack.com/messages/C0A92QZQW/ #3DPrinting (Slack)]
* [https://nottinghack.slack.com/messages/C0A8ZJK3J/ #General (Slack)]
* [https://groups.google.com/forum/#!topic/nottinghack/HaIj_roLIPE SLA Printer Pledge (Google Group)]
 
==Specs==
{| class="wikitable"
! Make
! Model
! Dimensions (mm)
! Max Print Size (mm)
! Resolution (mm)
! UV Wavelength (nm)
|-
| Monoprice
| Mini SLA LCD High Resolution (35435)
| 260 * 260 * 385
| 118 * 65 * 110
| 0.05
| 405
|-
| Anycubic
| Photon SLA
| 220 * 200 * 400
| 115 * 65 * 115
| 0.047
| 405
|}


==Further Details==
==Videos==


For discussion see #General and #3DPrinting (Slack)
* [https://www.youtube.com/watch?v=xDUWcQuj7VU Unboxing And Testing The Anycubic Photon 3D Printer (YouTube)]
* [https://www.youtube.com/watch?v=1tnDItw0ZLc Anycubic Photon – Ultimate detail 3D printing (YouTube)]
* [https://www.youtube.com/watch?v=5YrUQOYLoK0 Anycubic Photon DLP 3D printer Review - insane print quality! (YouTube)]
* [https://www.youtube.com/watch?v=nxXU8NQZIlw ANYCUBIC Photon: How to Clean Resin Vat after Printing? (YouTube)]
* [https://www.youtube.com/watch?v=7kHcsTG9QsM Resin 3D Printing Safety - Important for Beginners! (YouTube)]


[[Category:Pledge Drives]]
==Resources==
* [https://www.treatstock.com/static/uploads/printers/ANYCUBIC%20Photon%20User%20Manual_English_20171229.pdf Anycubic Photon SLA manual (PDF)]
* [https://downloads.monoprice.com/files/manuals/35435_Manual_190328.pdf MonoPrice Mini SLA LCD High Resolution Resin 3D Printer manual (PDF)]
* [https://www.thingiverse.com/thing:2861537 Wanhao D7 Curing Station (Thingiverse)]
[[Category:Pledge Drives (past)]]
[[Category:3D Printing]]

Latest revision as of 23:45, 11 September 2019

Note Note: This pledge drive was successful, see Anycubic Photon


Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer

Pledge drive to buy a Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer (£249) and parts for wash/cure stations (~£30)

Total cost: £279.00

This SLA 3D printer provides a higher resolution output than is possible with the Ultimaker Original+ (which is filament based). See specs below.

Stretch Goal/Additional Costs

photon printer

Printed parts need to be washed. They then need to be cured, preferably in an enclosed environment with a powered filter. Costs estimated at £30, some parts may already be available.

Resin costs: £20/500ml, plus wastage

If we have sufficient funds we will buy the Anycubic Photon SLA 3D printer as it has a better spec and support network, see review.

List of pledges

Please post on the google group mailing list if you really, truly have forgotten your HMS password and need someone else to update this.

Please pay with the reference SLAPRINTER-XX where XX is your initials and list the reference used below.

Who How Much Paid? Method Paid
James Taylor £25 Yes SLAPRINTER-JT (confirmed)
Andrew Walters £30 Yes SLAPRINTER-AW (confirmed)
David Spence £30 Yes cash(*)
Lee Hutchison £30 Yes SLAPRINTER-LH (confirmed)
Jon H £10 Yes SLAPRINTER-JH
Dan S £10 Yes Bank Transfer (confirmed)
Ian D £15 Yes Bank Transfer (confirmed)
Ed Podgorski (see talk) £15 Yes Cash in safe
Alex Sokolov £20 Yes SLAPRINTER-AS (confirmed)
Steve Barnett £20 Yes SLAPRINTER-SB (confirmed)
James Fowkes £20 No -
Paul Leivers £20 Yes SLAPRINTER-PL (confirmed)
Arthur Moore £10 Yes Transfer (confirmed)
Charlie Cole £10 Yes SLAPRINTER-CC (confirmed)
Maxima Bunting £10 No -
Sam Roberts £10 Yes BACS ref SLAPRINTER-SR (confirmed)
Bob Wood £10 Yes BACS (confirmed)
Betty Ching £10 Yes - Xfer (confirmed)
Eugen Juravliov £15 Yes -Cash in box
Ax Smith-Laffin £10 Yes Transfer (confirmed)

(*) cash will be used to purchase items directly(recipts supplied)(Dave s)

Note: Please try to make payment asap once target is met. Target has been met. Please start paying. Payment can be made by:

  • bank transfer (details on HMS)
  • cash to a Trustee.
  • cash posted into the safe next to the money gobbler(slot on top) please put in envelope with your name,pledge amount and "for 3d printer pledge drive".

Further discussion

For discussion see:

Specs

Make Model Dimensions (mm) Max Print Size (mm) Resolution (mm) UV Wavelength (nm)
Monoprice Mini SLA LCD High Resolution (35435) 260 * 260 * 385 118 * 65 * 110 0.05 405
Anycubic Photon SLA 220 * 200 * 400 115 * 65 * 115 0.047 405

Videos

Resources