BarBot/Meetings/Thu 2014-04-17: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Mousetad (talk | contribs)
Created page with "== BarBot Meeting 2014-04-17 == Attendees: Mouse, Ian D, Daniel S, Michael E, Banjoface, Ed Regrets: Seb P Agenda: Project status & progress, design talk, hacking things =..."
 
Mousetad (talk | contribs)
Line 24: Line 24:
** G&T
** G&T
* Mouse talked about stepper prototype thing
* Mouse talked about stepper prototype thing
* Hacking was done:
** Could not find driver for stepper, although a Nema 17 stepper was located which looks good
** Ed prototyped tipper device. 
** Ian used an aquarium air value / servo combo which worked to dispense soft drinks with a gravity feed.  Tube was quite thin, so flow rate was low
** Mouse failed to lasercut a peristaltic pump thing


=== Action Items ===
=== Action Items ===

Revision as of 23:11, 17 April 2014

BarBot Meeting 2014-04-17

Attendees: Mouse, Ian D, Daniel S, Michael E, Banjoface, Ed

Regrets: Seb P

Agenda: Project status & progress, design talk, hacking things

Summary

  • Review of last weeks meeting, progress during the week
    • Michael's optics arrived + soft drinks dispenser thing
    • Ian has a design for some soft drink dispenser
  • Michael showed the design of a peristaltic pump design, much of which can be laser cut
  • Mouse described Seb's progress and showed CAD drawings
    • Alternative bearing idea: from office chair (good idea Michael!)
  • Summary of components left to prototype / design
    • Carbonated dispensers
    • Squirters
    • Pinch valves
    • Lemon slice
    • Measuring mass of drink to control amount of mixers
  • Essential cocktails list?
    • G&T
  • Mouse talked about stepper prototype thing
  • Hacking was done:
    • Could not find driver for stepper, although a Nema 17 stepper was located which looks good
    • Ed prototyped tipper device.
    • Ian used an aquarium air value / servo combo which worked to dispense soft drinks with a gravity feed. Tube was quite thin, so flow rate was low
    • Mouse failed to lasercut a peristaltic pump thing

Action Items

  1. Mouse: meeting write-up, finish contact with EMF organisers re: drinkahol
  2. Mouse: to assist Michael with laser
  3. Mouse & Ian D: get some parts together for prototyping carbonated drinks dispensing
  4. Seb P: produce design for optic delivery device
  5. Seb P: continue with carousel!
  6. Banjoface: continue work on vaporiser accompaniment to BarBot (which is looking amazing!)

Outstanding Tasks

  1. Cocktail Research: Make a list of candidate (doable) cocktails to aim for
  2. Prototype squirters

Next Steps

  • Next meeting: next Thursday (2014-04-24)