DIY Laser/Frame: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Created page with "Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. == Extrusion == The Buildlog laser uses [http://uk.misumi-ec.co..."
 
Fowkc (talk | contribs)
(No difference)

Revision as of 00:23, 12 June 2014

Frame size is dependent on XY Gantry size, which is dependent on the bed size.

Extrusion

The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.

The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.