Rotabend TH1 Thermo Bending Strip Heater: Difference between revisions
Jump to navigation
Jump to search
m corrected date obtained |
m Added pledge drive info |
||
| Line 3: | Line 3: | ||
|manufacturer=Rotabend | |manufacturer=Rotabend | ||
|model=TH1 | |model=TH1 | ||
|obtained=2019 | |obtained=Pledge 2019 | ||
|obtaineddate= | |obtaineddate= | ||
|location=Craft Room | |location=Craft Room | ||
| Line 24: | Line 24: | ||
The cooling jig in the box does 45, 90, 135 and 180 degree bends. | The cooling jig in the box does 45, 90, 135 and 180 degree bends. | ||
The heater was obtained by [[Strip Heater Pledge]] | |||
Latest revision as of 14:12, 13 March 2025
| Rotabend TH1 Thermo Bending Strip Heater | |
|---|---|
 | |
| Manufacturer | Rotabend |
| Model | TH1 |
| Obtained | Pledge 2019 |
| Location | Craft Room |
| Team | Craft & Textiles |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
The Acrylic Bender (not to be confused with the printer called Bender) is in a long cardboard box on the shelves of the Craft Room.
As well as acrylic it can bend ABS and polycarbonate sheets.
A hot wire softens the plastic along a straight line and then can be manually bent and left to harden in the cooling jig.
Read the Operating Instructions booklet in the box before use.
Maximum thickness of plastic: 6mm Maximum width of sheet / length of bend line 450mm
The cooling jig in the box does 45, 90, 135 and 180 degree bends.
The heater was obtained by Strip Heater Pledge