Megger PAT320 Portable Appliance Tester: Difference between revisions
m Add risk assessment |
Note about calibration |
||
| Line 26: | Line 26: | ||
Hackspace testing procedures: [[Portable appliance testing]] | Hackspace testing procedures: [[Portable appliance testing]] | ||
The tester should be calibrated periodically by an external service, usually annually but a longer interval may be acceptable in our case. This was last done on '''07/07/25''' | |||
Latest revision as of 09:58, 11 July 2025
| Megger PAT320 Portable Appliance Tester | |
|---|---|
| Manufacturer | Megger |
| Model | PAT320 |
| Location | Members Storage |
| Team | Infrastructure |
| Induction Required | No |
| Risk Assessment | Yes, see the assessment |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
The Portable Appliance Tester (PAT) is kept in the upstairs Members_Storage in red cabinet 2 on the left as you enter. It comes with a black case containing the unit, test leads and, in a pocket, instruction manual, instruction CDs, and a supply of Pass and Fail stickers. The manual is also available online [1].
The PAT can work with both 230V and 110V supplies and automatically switches according to the supply it is plugged into.
Warning: Mains voltage. The unit exposes mains voltage to its sockets and test leads. Observe handling precautions in the manual. Faulty equipment under test may expose dangerous voltages on its case and other places
Warnings: Read the warnings on page 5 of the manual, and carefully follow the recommended procedures.
Only plug into the mains using the attached black cable. Never plug into the mains using the IEC "kettle" socket. (The red lead is for testing extension cables.)
Page 9 of the manual explains how to turn on the unit. Do not attach any equipment to be tested until the unit has successfully started up.
Hackspace testing procedures: Portable appliance testing
The tester should be calibrated periodically by an external service, usually annually but a longer interval may be acceptable in our case. This was last done on 07/07/25
