BarBot/Real-time software: Difference between revisions
< BarBot
Created page with "== Real-time Software (hardware control) == BarBot's various dispensers will require some level of control. === Moving Platform === Although the design of the platform has..." |
m Danspencer101 moved page Project:BarBot/Real-time software to BarBot/Real-time software |
| (One intermediate revision by one other user not shown) | |
(No difference)
| |
Latest revision as of 11:49, 5 February 2019
Real-time Software (hardware control)
BarBot's various dispensers will require some level of control.
Moving Platform
Although the design of the platform has yet to be prototyped, it is likely it will look something like the sideways axis of a RepRap - motion will be achieved using a stepper motor. In this case the software control should:
- Be able to move accurately to the correct location for a desired dispenser, i.e. "position 3"
- Accelerate gently to speed
- Decelerate gently to a halt at the correct location
Optic dispenser
TODO