SLA Printer Pledge: Difference between revisions
| Line 29: | Line 29: | ||
| [[User:layjet|James Taylor]] || £25 || Yes || SLAPRINTER-JT | | [[User:layjet|James Taylor]] || £25 || Yes || SLAPRINTER-JT | ||
|- | |- | ||
| [[User:Monstertruckglue|Andrew Walters]] || £30 || | | [[User:Monstertruckglue|Andrew Walters]] || £30 || YES ||SLAPRINTER-AW | ||
|- | |- | ||
| [[User:daves|David Spence]] || £30 || Yes || cash(*) | | [[User:daves|David Spence]] || £30 || Yes || cash(*) | ||
Revision as of 18:32, 18 July 2019
Pledge drive to buy a Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer (£249) and parts for wash/cure stations (~£30)
Total cost: £279.00
This SLA 3D printer provides a higher resolution output than is possible with the Ultimaker Original+ (which is filament based). See specs below.
Stretch Goal/Additional Costs
Printed parts need to be washed. They then need to be cured, preferably in an enclosed environment with a powered filter. Costs estimated at £30, some parts may already be available.
Resin costs: £20/500ml, plus wastage
If we have sufficient funds we will buy the Anycubic Photon sla 3D printer as it has a better spec and support network, see review.
List of pledges
Please post on the google group mailing list if you really, truly have forgotten your HMS password and need someone else to update this.
Please pay with the reference SLAPRINTER-XX where XX is your initials and list the reference used below.
| Who | How Much | Paid? | Method Paid |
|---|---|---|---|
| James Taylor | £25 | Yes | SLAPRINTER-JT |
| Andrew Walters | £30 | YES | SLAPRINTER-AW |
| David Spence | £30 | Yes | cash(*) |
| Lee Hutchison | £30 | Yes | SLAPRINTER-LH |
| Jon H | £10 | No | - |
| Dan S | £10 | Yes | Bank Transfer |
| Ian D | £15 | Yes | Bank Transfer |
| Ed Podgorski (see talk) | £15 | Yes | Cash in safe |
| Alex Sokolov | £20 | Yes | SLAPRINTER-AS |
| Steve Barnett | £20 | Yes | SLAPRINTER-SB |
| James Fowkes | £20 | No | - |
| Paul Leivers | £20 | Yes | SLAPRINTER-PL |
| Arthur Moore | £10 | Yes | Transfer |
| Charlie Cole | £10 | Yes | SLAPRINTER-CC |
| Maxima Bunting | £10 | No | - |
| Sam Roberts | £10 | Yes | BACS ref SLAPRINTER-SR |
| Bob Wood | £10 | Yes | BACS |
| Betty Ching | £10 | No | - |
| Eugen Juravliov | £15 | No | - |
| Ax Smith-Laffin | £10 | Yes | Transfer |
(*) cash will be used to purchase items directly(recipts supplied)(Dave s)
Note: Please try to make payment asap once target is met. Target has been met. Please start paying. Payment can be made by:
- bank transfer (details on HMS)
- cash to a Trustee.
- cash posted into the safe next to the money gobbler(slot on top) please put in envelope with your name,pledge amount and "for 3d printer pledge drive".
Further discussion
For discussion see:
Specs
| Make | Model | Dimensions (mm) | Max Print Size (mm) | Resolution (mm) | UV Wavelength (nm) |
|---|---|---|---|---|---|
| Monoprice | Mini SLA LCD High Resolution (35435) | 260 * 260 * 385 | 118 * 65 * 110 | 0.05 | 405 |
| Anycubic | Photon SLA | 220 * 200 * 400 | 115 * 65 * 115 | 0.047 | 405 |
Videos
- Unboxing And Testing The Anycubic Photon 3D Printer (YouTube)
- Anycubic Photon – Ultimate detail 3D printing (YouTube)
- Anycubic Photon DLP 3D printer Review - insane print quality! (YouTube)
- ANYCUBIC Photon: How to Clean Resin Vat after Printing? (YouTube)
- Resin 3D Printing Safety - Important for Beginners! (YouTube)