Counting Poo

Counting Poo
[[{{{image}}}|border|frameless|220px|center]]
Primary Contact	Matt Little‎
Created	{{{created}}}
Completed	{{{completeddate}}}
Dormant	{{{dormantdate}}}
Version	{{{version}}}
Members	{{{members}}}
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	{{{status}}}
Type	Undefined
Live Status	{{{livestatus}}}
QR code

Outline

This is a project via Nicola Greene to assist International NGO, Water for People with their work in Uganda.

The NGO install latrines in various urban and rural areas in Uganda. They have been having an issue with the fill rates of the latrines and are wanting to get real data on the use of the latrines. This means recoding visits to the latrines and counting the number of flushes made. Knowledge of the volume and weight of the deposits made each visit would be an added bonus.

A good overview of the problem and project is available here: http://www.slideshare.net/NicolaGreene/nicola-greene-msc-introduction-slideshare-28634508 For more on why sanitation is important: http://www.wateraid.org/uk/what-we-do/the-crisis/sanitation?gclid=CNm0p7nz67sCFQPmwgodFRYAug

The device must be:

• Robust
• Easy to install on existing equipment
• Low cost ($50-$200 budget per unit)

Hackday 11/1/14

Primary Objective: Produce a prototype to monitor a 'flush' event and record that data. Secondary Objectives: Determine flush volume Determine solid/liquid proportion Determine latrine volume

Brainstormed ideas

Flush Sensing

Idea	Description	Advantages	Disadvantages
Mechanical Flap	A hinged/moving cover on the waste pipe outflow that is moved by a flush.	Simple and robust. Maintainable in-situ. Low or zero power.	Risk of causing blockage. Metallic components will corrode in high humidity/heat?
Beam break (across pipe)	An IR/visible light beam is transmitted across the pipe. A flush breaks the beam.	Cheap components Solid-state solution	Waste on either transmitter or receiver will cause false readings
Reflective Sensor	An IR/visible Tx/Rx pair is underneath the outflow pipe. The beam is reflected by a flush into the receiver.	Cheap components Solid-state solution Can be "baffled" to stop waste interfering with sensing	Can waste be completely eliminated from getting in the way?
Temperature Sensor	A temperature sensor (probably a thermistor) is mounted on/in the waste pipe. A flush changes the temperature.	Cheap components Solid-state solution Not affected by buildup of waste (unless large amounts are present	Relies on temperature difference between waste and ambient pit temperature May be too slow to react to changes May have to be placed within flow, possible restriction/blockage May require designing to be flush with pipe surface
Piezo/microphone Sensor	A piezo or microphone is placed on the pipe. A flush causes vibrations that are picked up and amplified for sensing.	Solid-state solution	Requires significant analog circuitry for signal conditioning Requires significant software for signal processing Unknown effect of other vibration sources (e.g. nearby road) Possible that waste on sensor will dampen/alter vibration characteristics
Moisture Sensor	A moisture sensor is placed within the pipe. A flush changes the resistance of the sensor.	Low cost, solid-state solution	Has to be placed within flow, possible restriction/blockage May require designing to be flush with pipe surface

Waste Volume Sensing

Ultrasonic Sensor	An ultrasonic Tx/Rx pair placed on the pit lid will measure distance from lid to top-of-waste With knowledge of the dimensions of the pit, this will allow volume calculation.	Non-contact, solid-state sensing	Relatively high cost Must be calibrate to pit dimensions for best data Likely to be incompatible with "tiger worm tray" composting addition?
Resistive/Capacitive Sensor	A series of sensors on a "pole" mounted vertically in the pit will be used to measure depth.	Potential to be very simple, low-cost solution	Sensors in contact with waste need to be protected against corrosion