Spray Booth: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
= Switching On/Off = | = Switching On/Off = | ||
The photo shows the extension behind the laser cutter | The photo shows the spray booth plugged into an extension behind the laser cutter. As this is not convenient for access, it is now connected to an extension accessible from the Electronics Bay. | ||
At the moment, there is a six-plug extension behind the laser cutter with a plug reserved for the spray booth on the right hand side. The plug for the spray booth should be dangling nearby and should be plugged in to switch the fans/lighting on. | The power is fed through a RCD safety cutout - pme button turns on the power, the other trips it off. | ||
<del>At the moment, there is a six-plug extension behind the laser cutter with a plug reserved for the spray booth on the right hand side. The plug for the spray booth should be dangling nearby and should be plugged in to switch the fans/lighting on.</del> | |||
[[File:Spray booth plug 01.jpg|320px|frameless]][[File:Spray booth plug 02.jpg|320px|frameless]] | [[File:Spray booth plug 01.jpg|320px|frameless]][[File:Spray booth plug 02.jpg|320px|frameless]] | ||
Revision as of 10:12, 12 December 2014
Switching On/Off
The photo shows the spray booth plugged into an extension behind the laser cutter. As this is not convenient for access, it is now connected to an extension accessible from the Electronics Bay.
The power is fed through a RCD safety cutout - pme button turns on the power, the other trips it off.
At the moment, there is a six-plug extension behind the laser cutter with a plug reserved for the spray booth on the right hand side. The plug for the spray booth should be dangling nearby and should be plugged in to switch the fans/lighting on.
placeholder!
- infrastructure tag
- why it's cool
- why it's there!
- using it
- etiquette
- other people's projects
- drying time
- overspray!
- dust/fumes etc.
- PPE gear
- masks
- goggles
- overalls
- "take a break"
- etc!