Bartop Arcade Machine: Difference between revisions

Revision as of 12:03, 10 March 2015

Mini Defender machine based on Raspberry Pi with separate control panel.

Dell LCD monitor with broken controls
HP PC speakers from scrap
- Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf
Raspberry Pi
- currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014)
- shall probably upgrade if performance is a problem
HDMI-VGA adapter & gender changer
19mm plywood sides
- annoyingly the plywood is not even flat! both sides bend off square to one side!
T-Molding
- slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat!
living hinge plywood bends with veneer surface
backlit marquee panel
PiPlay AdvanceMAME install
Control panel: Defender layout
- original dimensions metricated!
- laminated laser cut ply and MDF
- gold leaf switch buttons
- Sanwa bat joystick with modified plate

@@ Line 5: / Line 5: @@
 ** Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf
 * Raspberry Pi
+** currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014)
+** shall probably upgrade if performance is a problem
 * HDMI-VGA adapter & gender changer
 * 19mm plywood sides
+** annoyingly the plywood is not even flat! both sides bend off square to one side!
 * T-Molding
-** slot cutter
+** slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat!
 * living hinge plywood bends with veneer surface
 * backlit marquee panel