Reprap Prusa: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
| M8 nut | | M8 nut | ||
| Fastener | | Fastener | ||
| Buy a 100-pack to be on the safe side. | | Buy a 100-pack to be on the safe side. (NOT GOT) | ||
|+ | |+ | ||
| 93 | | 93 | ||
| M8 washer | | M8 washer | ||
| Fastener | | Fastener | ||
| Buy a 100-pack to be on the safe side. | | Buy a 100-pack to be on the safe side. (GOT) | ||
|+ | |+ | ||
| 6 | | 6 | ||
| M8×30 mudguard / fender washers | | M8×30 mudguard / fender washers | ||
| Fastener | | Fastener | ||
| | | (NOT GOT) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| M4×20 bolt | | M4×20 bolt | ||
| Fastener | | Fastener | ||
| | |(GOT) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| M4 nut | | M4 nut | ||
| Fastener | | Fastener | ||
| | |(GOT) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| M4 washer | | M4 washer | ||
| Fastener | | Fastener | ||
| | |(GOT) | ||
|+ | |+ | ||
| 22 | | 22 | ||
| M3×10 bolt | | M3×10 bolt | ||
| Fastener | | Fastener | ||
| | |(GOT) | ||
|+ | |+ | ||
| 16 | | 16 | ||
| M3×25 bolt | | M3×25 bolt | ||
| Fastener | | Fastener | ||
| Or eight M3×25 bolt plus eight M3x20 bolts, see §8 steps 5 and 13 for details. | | Or eight M3×25 bolt plus eight M3x20 bolts, see §8 steps 5 and 13 for details. (GOT all options) | ||
|+ | |+ | ||
| 4 | | 4 | ||
| M3×40 bolt | | M3×40 bolt | ||
| Fastener | | Fastener | ||
| | |(GOT) | ||
|+ | |+ | ||
| 70 | | 70 | ||
| M3 washer | | M3 washer | ||
| Fastener | | Fastener | ||
| | |(GOT) | ||
|+ | |+ | ||
| 40 | | 40 | ||
| M3 nut | | M3 nut | ||
| Fastener | | Fastener | ||
| Eight optionally locknut / stop nut / nyloc | | Eight optionally locknut / stop nut / nyloc (GOT) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| M3 grub screw / set screw | | M3 grub screw / set screw | ||
| Fastener | | Fastener | ||
| | | (GOT see Matt) | ||
|+ | |+ | ||
| 3 | | 3 | ||
| 608 roller skate / inline skate / skateboard bearing | | 608 roller skate / inline skate / skateboard bearing | ||
| Bearings | | Bearings | ||
| | | (GOT) | ||
|+ | |+ | ||
| 4 | | 4 | ||
| ballpoint pen springs | | ballpoint pen springs | ||
| Spring | | Spring | ||
| | |(GOT - various springs at space - others available) | ||
|+ | |+ | ||
| 6 | | 6 | ||
| M8×370mm | | M8×370mm | ||
| Threaded rod | | Threaded rod | ||
| Three per side | | Three per side (GOT) | ||
|+ | |+ | ||
| 4 | | 4 | ||
| M8×294mm | | M8×294mm | ||
| Threaded rod | | Threaded rod | ||
| Front / rear | | Front / rear (GOT) | ||
|+ | |+ | ||
| 3 | | 3 | ||
| M8×440mm | | M8×440mm | ||
| Threaded rod | | Threaded rod | ||
| Top / bottom | | Top / bottom (GOT) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| M8×210mm | | M8×210mm | ||
| Threaded rod | | Threaded rod | ||
| Z-leadscrew | | Z-leadscrew (GOT) | ||
|+ | |+ | ||
| 1 | | 1 | ||
| M8×50mm | | M8×50mm | ||
| Threaded rod | | Threaded rod | ||
| Or bolt for X idler | | Or bolt for X idler (GOT) | ||
|+ | |+ | ||
| 2 | | 2 | ||
| Line 169: | Line 169: | ||
| 8mm ID spring | | 8mm ID spring | ||
| Spring | | Spring | ||
| If using opto endstops | | If using opto endstops (GOT - various springs at space - others available) | ||
|} | |} | ||
We have all the M8 rod, the M8 washers, all the M3 and M4 parts. | We have all the M8 rod, the M8 washers, all the M3 and M4 parts. | ||
Revision as of 08:42, 23 May 2011
Main source of information: the Prusa page at reprap.org -- http://reprap.org/wiki/Prusa
Build instructions: File:Prusa Mendel Visual Instructions (Mininum Resolution).pdf
BOM: --
| Quantity | Description | Type | Comments |
|---|---|---|---|
| 83 | M8 nut | Fastener | Buy a 100-pack to be on the safe side. (NOT GOT) |
| 93 | M8 washer | Fastener | Buy a 100-pack to be on the safe side. (GOT) |
| 6 | M8×30 mudguard / fender washers | Fastener | (NOT GOT) |
| 2 | M4×20 bolt | Fastener | (GOT) |
| 2 | M4 nut | Fastener | (GOT) |
| 2 | M4 washer | Fastener | (GOT) |
| 22 | M3×10 bolt | Fastener | (GOT) |
| 16 | M3×25 bolt | Fastener | Or eight M3×25 bolt plus eight M3x20 bolts, see §8 steps 5 and 13 for details. (GOT all options) |
| 4 | M3×40 bolt | Fastener | (GOT) |
| 70 | M3 washer | Fastener | (GOT) |
| 40 | M3 nut | Fastener | Eight optionally locknut / stop nut / nyloc (GOT) |
| 2 | M3 grub screw / set screw | Fastener | (GOT see Matt) |
| 3 | 608 roller skate / inline skate / skateboard bearing | Bearings | (GOT) |
| 4 | ballpoint pen springs | Spring | (GOT - various springs at space - others available) |
| 6 | M8×370mm | Threaded rod | Three per side (GOT) |
| 4 | M8×294mm | Threaded rod | Front / rear (GOT) |
| 3 | M8×440mm | Threaded rod | Top / bottom (GOT) |
| 2 | M8×210mm | Threaded rod | Z-leadscrew (GOT) |
| 1 | M8×50mm | Threaded rod | Or bolt for X idler (GOT) |
| 2 | 8mm×420mm | Smooth rod | |
| 2 | 8mm×406mm | Smooth rod | Y-bar |
| 2 | 8mm×350mm | Smooth rod | Z-bar |
| 1 | 225mm×225mm print top plate | Thick Sheet | |
| 1 | 140mm×225mm print bottom plate | Thick Sheet | |
| 1 | 840mm×5mm T5 pitch timing belt | Belt | |
| 1 | 1380mm×5mm T5 pitch timing belt | Belt | |
| 5 | NEMA 17 bipolar stepper motor | Stepper | |
| 50 | small cable binder / ziptie | Misc | |
| 1 | Wade's Geared Extruder | Or any other compatible extruder | |
| 1 | Electronics + endstops | This can be RAMPS, Gen6, Gen3, or anything else compatible | |
| 3 | 30mm×10mm Optoflags | Thin Sheet | If using opto endstops |
| 2 | 8mm ID spring | Spring | If using opto endstops (GOT - various springs at space - others available) |
We have all the M8 rod, the M8 washers, all the M3 and M4 parts.