Spider Geocache

Spider Geocache
Primary Contact	Danspencer101
Created	17/03/2019
Completed
Dormant
Version
Members
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	In Progress
Type	Members Project
Live Status
QR code

This geocache is a 3D printed cache to replace one that went missing on a trail I maintain in Derby. The waterproof part that will hold the log sheet is a 1.2ml phial so it will be classed as a micro cache.

Modelling

3D Model

The cache is based upon a spider model that I found on thingiverse. I originally printed this without the base but got reports that the leg snapped off after it being outside for less than a week so decided to add it in. I was also struggling with the legs detaching from the bed due to poor adhesion; the base solved this problem.

I modified the STL file by putting a hole on the underside to press fit the Phial into and added a base that strengthens the spiders legs.

3D Print

Printed on my Creality CR-10s at home overnight simply because it took about 9hrs to print and I didn't want to stay with our 3D Printer for that length of time.

• 
  First Layer
• 
  Halfway through

Assembly

I removed the supports & press fitted the phial into the hole with a drop of super glue to lock it in place.

In addition I put a dab of super glue on to the foot of each leg to further strengthen the weak point.

• 
  Push fit the container
• 
  Drop of glue on each leg

Paint

I will paint the base plate at the bottom green or something to blend in with the ground and will paint the spider black.