Difference between revisions of "Mini VFD"
m (Danspencer101 moved page Project:Mini VFD to Mini VFD over redirect) |
m (infobox) |
||
Line 1: | Line 1: | ||
+ | {{Project | ||
+ | |image= | ||
+ | |name=Mini VFD | ||
+ | |primary=[[User:msemtd|Michael]] | ||
+ | |created=26/04/2012 | ||
+ | |completeddate=10/12/2014 | ||
+ | |dormantdate= | ||
+ | |version= | ||
+ | |members= | ||
+ | |status=complete | ||
+ | |type=member | ||
+ | |livestatus= | ||
+ | |qrmode=1 | ||
+ | |LookingforCollaborators= | ||
+ | }} | ||
A small Vacuum Flourescent Display I recovered from the skip at work. | A small Vacuum Flourescent Display I recovered from the skip at work. | ||
Revision as of 22:34, 20 April 2019
Mini VFD | |
---|---|
Primary Contact | Michael |
Created | 26/04/2012 |
Completed | 10/12/2014 |
Status | complete |
Type | Members Project |
QR code |
A small Vacuum Flourescent Display I recovered from the skip at work.
It is housed in a project box with a mains transformer - it use to have a mystery 9-pin serial port input but it wouldn't work until we worked out that it was expecting a 5V TTL serial signal.
The Futaba Corp M202SD08G module is a 20 character x 2 line, 5x8 dot matrix display. It has a European font with characters in the range from 0x20 (space) through the ASCII range and up to 0xFF with a bunch of Greek and Cyrillic characters.
- http://www.futaba.com/products/displays/app_notes/index.asp
- http://www.futaba.com/products/display_modules/module_products/character/index.asp
- http://docs-europe.origin.electrocomponents.com/webdocs/0d12/0900766b80d12d9a.pdf
I've put a Xino into the box and I'm working on something amusing for it to do in the hackspace.
The module has a single 20 pin connector (2x10 0.1" pins) of which we only need connection for +5V, GND, serial data in and a busy line out. The module asserts the busy line when it is working but it is enough to just make short delays in your code!
I have a simple Arduino sketch that just shows each character. It uses NewSoftSerial on pins 2 and 3 as well as regular serial on pins 0 and 1 (on old Arduino0022) just for testing to see if NewSoftSerial is any good.
The mains transformer in the box is this LASCAR PSU 201 Fixed Voltage Single Rail Power Supply...
- http://www.lascarelectronics.com/temperaturedatalogger.php?datalogger=126
- Quite expensive at £107: http://uk.farnell.com/lascar/psu-20105/lascar-part/dp/2083568
Although the unit is useful as a plain serial-driven ASCII display there are some interesting capabilities alluded to in the various datasheets. The VFD character table includes some programmable characters. I'd like to have a go at this! There are control sequences to shift the screen and create a scrolling effect.