Talk:Cheesoid

Interaction Goals

Cheesoid is intended to be a fully autonomous robot that interacts with people and objects in its environment. Human-Robot interaction is a massive subject but I intend to get some rudimentary (and comedic) speech and general input features in place as soon as possible. The environment interactions will develop as I learn more about sensing and mapping. Since the robot will live at Hackspace I have two basic goals for comedy value: -

• interact with the fridge for cheese status
• interact with the petrol pump for petrol status

So...

• it needs to know where they are to go and talk to them
• the status needs to be stored and needs to be set - Xino at each? Via IRC bot? Some web interface?
• it need to be able to read the status from the fridge and the petrol pump - what sort of interface? IR remote control?

Petrol status

• just a number!

Cheese status

• many cheese types - each with use by date
• Primula status is "in tube"

Human - Robot Interactions: speech

With the eeePC I have a very capable processor on board and I'm taking full advantage of that: -

• using espeak for text to speech
• using sphinx for speech recognition

speech recognition with sphinx

http://cmusphinx.sourceforge.net/wiki/tutorialconcepts

The sphinx packages

p    --\ sphinx2-bin                                                                                                                    <none>     0.6-2.1
  Description: speech recognition utilities
    Sphinx 2 is a real-time, speaker-independent speech recognition system.

    This package contains examples and utilities that use Sphinx. It also includes a sample language model that is capable of recognizing simple commands
    like "go forward ten meters" and other commands one might use to tell a robot where to move.
  Priority: optional
  Section: universe/sound
  Maintainer: Ubuntu MOTU Developers <ubuntu-motu@lists.ubuntu.com>
  Compressed size: 129k
  Uncompressed size: 500k
  Source Package: sphinx2
  --\ Depends (3)
    --- libc6 (>= 2.4)
    --- libsphinx2g0 (>= 0.6) (UNSATISFIED)
    --- sphinx2-hmm-6k (UNSATISFIED)
  --\ Packages which depend on sphinx2-bin (0)
  --\ Versions of sphinx2-bin (1)
p    0.6-2.1

Good examples of the use of sphinx: -

• http://perlbox.sourceforge.net/

Mobility

• motors
• wheels
• chassis
• motor power
• motor control circuitry
• big battery

Drive motors: I now have my 12V 150RPM gearmotors from China

• simple test circuits with 12V battery and driver ICs
  • Texas Instruments L293NE or Texas Instruments SN754410 (almost equivalent)
  • useful searches L293NE or SN754410 PWM arduino
  • http://itp.nyu.edu/physcomp/Labs/DCMotorControl
  • http://www.ti.com/product/sn754410
  • datasheet: http://www.sparkfun.com/datasheets/IC/SN754410.pdf
  • PWM for speed control - a two motor library perhaps with feedback loop via rotary encoder?
    • using PWM on 2 motors http://letsmakerobots.com/node/2074
  • Adafruit motor shield is a good example:
    • http://www.adafruit.com/products/81
    • http://www.ladyada.net/images/mshield/mshieldv1-schem.png
    • My own custom motor shield for 2 DC motors

• motor mountings
  • simple aluminium angle mountings - might make some more of these with greater accuracy!
• motor to axle couplings
  • http://uk.rs-online.com/web/c/mechanical-components/power-transmission-components/oldham-style-couplings-accessories/
  • simple, cheap
• building the wheels/axles/bearing hubs: nearly done - some tweaking and securing to do

• building the plastic chassis
  • what's that display board plastic material called?
  • is it http://www.foamcore.com/ultra-board.html
  • milling the plastic - is nicely cut with a fine jigsaw blade - try router table!
  • can it be laser cut? may contain chlorine or other nasties: see http://www.nycresistor.com/2008/08/28/how-to-identify-polymers-with-burnination/

• battery regulation: http://letsmakerobots.com/node/3880
• battery mounting - where?
  • chassis strong enough to carry those batteries? !!!!
  • aluminium cross bracing?
  • perhaps move to 2x 6V - keep it flexible

OK, motors tested with a two motor circuit...

Motor Test sketch (non-PWM)

int motor_left[] = {
  2, 3};
int motor_right[] = {
  7, 8};
const int ledPin = 13;      // LED 
const int switchPin = 10;    // switch input
const int enablePin = 9;    // H-bridge enable pin


// ————————————————————————— Setup
void setup() {
  Serial.begin(9600);
  pinMode(ledPin, OUTPUT);
  pinMode(switchPin, INPUT); 
  pinMode(enablePin, OUTPUT);


  // Setup motors
  int i;
  for(i = 0; i < 2; i++){
    pinMode(motor_left[i], OUTPUT);
    pinMode(motor_right[i], OUTPUT);
  }
  check_enable();
  // blink the LED 3 times. This should happen only once.
  // if you see the LED blink three times, it means that the module
  // reset itself,. probably because the motor caused a brownout
  // or a short.
  blink(ledPin, 3, 100);

}


void check_enable(){
  digitalWrite(enablePin, digitalRead(switchPin));
}
// ————————————————————————— Loop
void loop() {

  drive_forward();
  delay(1000);
  motor_stop();
  Serial.println("1");

  drive_backward();
  delay(1000);
  motor_stop();
  Serial.println("2");

  turn_left();
  delay(1000);
  motor_stop();
  Serial.println("3");

  turn_right();
  delay(1000);
  motor_stop();
  Serial.println("4");

  motor_stop();
  delay(1000);
  motor_stop();
  Serial.println("5");
}

// ————————————————————————— Drive

void motor_stop(){
  check_enable();
  digitalWrite(motor_left[0], LOW);
  digitalWrite(motor_left[1], LOW);

  digitalWrite(motor_right[0], LOW);
  digitalWrite(motor_right[1], LOW);
  delay(25);
}

void drive_forward(){
  check_enable();
  digitalWrite(motor_left[0], HIGH);
  digitalWrite(motor_left[1], LOW);

  digitalWrite(motor_right[0], HIGH);
  digitalWrite(motor_right[1], LOW);
}

void drive_backward(){
  check_enable();
  digitalWrite(motor_left[0], LOW);
  digitalWrite(motor_left[1], HIGH);

  digitalWrite(motor_right[0], LOW);
  digitalWrite(motor_right[1], HIGH);
}

void turn_left(){
  check_enable();
  digitalWrite(motor_left[0], LOW);
  digitalWrite(motor_left[1], HIGH);

  digitalWrite(motor_right[0], HIGH);
  digitalWrite(motor_right[1], LOW);
}

void turn_right(){
  check_enable();
  digitalWrite(motor_left[0], HIGH);
  digitalWrite(motor_left[1], LOW);

  digitalWrite(motor_right[0], LOW);
  digitalWrite(motor_right[1], HIGH);
}

/*
    blinks an LED
 */
void blink(int whatPin, int howManyTimes, int milliSecs) {
  int i = 0;
  for ( i = 0; i < howManyTimes; i++) {
    digitalWrite(whatPin, HIGH);
    delay(milliSecs/2);
    digitalWrite(whatPin, LOW);
    delay(milliSecs/2);
  }
}

This sketch is a munge of http://letsmakerobots.com/node/2074 and http://itp.nyu.edu/physcomp/Labs/DCMotorControl

I want to have motor enable based on digital logic as this will be controlled by bumper and cliff sensors

Range Sensors

• SRF05 by Devantech Ltd
  • http://robot-electronics.co.uk/acatalog/Ultrasonic_Rangers.html
  • http://www.robot-electronics.co.uk/htm/srf05tech.htm

Xino upgrades

• power screw terminal blocks: http://uk.rs-online.com/web/p/products/4258720/
• smt caps for smt regulators!

PIN usage on main Xino

• PWM capable pins: 3,5,6,9,10,11
• Dig out x2 for eyes
• Dig in for mode switch
• dig out for beacon on pin 13
• motor enable dig out
• PWM x4 for motor logic control - can it be reduced?
• bumper and cliff inputs - use serial mux?
• others!

PIN usage summary table...

TODO

goal/job list

HS:

• backup multimeter and hook probes - label it and solder plugs onto probe wires

• pizza box mods
  • power port extension
  • USB extension - USB hub
  • PWR switch extension - LED in "Micro", PWR switch? Monostable/bistable startup flasher circuit for "Micro" switch

• eeePC mods
  • Lid switch: do not suspend when lid closed - instead just switch to external monitor output
    • http://forum.eeeuser.com/viewtopic.php?pid=20450#p20450
    • sudo nano /etc/acpi/lidbtn.sh

#!/bin/sh
LID_STATE=`cat /proc/acpi/button/lid/LID/state | awk '{print $2 }'`

if [ $LID_STATE = "closed" ] ; then
#    /etc/acpi/suspend2ram.sh
        /bin/su user -c "/usr/bin/xrandr --output VGA --mode 800x600 --output LVDS --off"
fi
if [ $LID_STATE = "open" ] ; then
        /bin/su user -c "/usr/bin/xrandr --output LVDS --preferred --output VGA --off"
fi
exit 0

• • clean up and test external monitor output
  • remove easymode
  • better power switch functionality
  • http://wiki.eeeuser.com/howto:useicewm#configuration_of_icewm

• cylinder case mods
  • speakers in mouth plate/grill
  • side mount for Xino and boards
  • top for beacon - keep on side for now
  • mounting of cylinder on pizza box

• Xino/UNO main sketch code
  • motor drive code and motor drive commands from PC
  • speech commands from

• PC app code
  • console read and process
  • speech module
    • speech commands from stdin
    • speech thread - busy flag and job queue management
  • motor module
    • motor control input from STDIN
  • sensor module
  • camera module - look at Java interaction with V4L or whatever is in use
  • mic input - and speech recognition
  • GUI interface port and GUI app

--Michael Erskine 11:38, 28 September 2011 (EST)

Rotary Encoders for wheels

• an easily available "obsolete" ball type PS/2 mouse
• Microsoft "Mouse Port Compatible Mouse 2.0A"
• using the serial output from the mouse circuitry
• encoder usage in daylight
• mounting encoder wheel to axle

eeePC problems

• unionfs inode depletion causing "No space left on device" but df shows plenty of space!
  • http://forum.eeeuser.com/viewtopic.php?pid=537876#p537876
  • mount /dev/sda2 elsewhere and remove the '.wh*' files
• running out of space due to other errors ~/.Xsession-errors
• firefox won't start - oh well!

work!

Motor shaft couplings being the most annoying thing right now

• I really need some well made couplings like these