Combat Robotics: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Stl100 (talk | contribs)
McMullet (talk | contribs)
No edit summary
Line 31: Line 31:
** High-energy springs
** High-energy springs
This is not an exhaustive list and the marshal will review the safety of every robot during tech checks.
This is not an exhaustive list and the marshal will review the safety of every robot during tech checks.
=Recommended parts and build instructions=
There are some great guides to building on the [https://bristolbotbuilders.com/guides.html#ant Bristol Bot Builders] site, and they also sell [https://shop.bristolbotbuilders.com/product-category/antweight/ antweight robot parts], including a complete [https://shop.bristolbotbuilders.com/product/antkit/ antweight kit] - this does require a suitable transmitter, or a paired transmitter/receiver though!
Alternatively, you can buy a complete, ready-to-drive antweight kit from [https://teamsc.co.uk/product/ant_bots/ Team SC] or [https://nutsandbots.co.uk/shop/ Nuts and Bots]
For general advice there is some great information on the [https://www.fightingrobots.co.uk/forums/126-build-diaries FRA]
and [https://robotwars101.org/forum/index.php RW101] forums - these are not very active these days though, so if you have a specific question you may not get an answer for a few days/months/years.
There are some useful groups on Facebook, and this is probably a better bet if no one on the Slack channel can help:
*[https://www.facebook.com/groups/1544017005882134 Combat Robotics] - good general group
*[https://www.facebook.com/groups/520227711513867 Antweight Combat Robots] - be warned that in the US antweights are confusingly 440g not 150g, and 150g robots are called fairyweights. It's all very confusing.
*[https://www.facebook.com/groups/BristolBotBuilders Bristol Bot Builders] again
... and finally, don't forget to keep in mind the rules from [http://www.fightingrobots.co.uk/documents/Build-Rules.pdf the FRA] and [https://www.robotwars101.org/ants/rules.htm RW101].


=Inaugural Event - 30th of April 2022!=
=Inaugural Event - 30th of April 2022!=

Revision as of 18:09, 5 April 2023

Combat Robotics
[[|border|frameless|220px|center]]
Primary Contact McMullet
Created
Completed
Dormant
Version
Members McMullet
Manufacturer {{{manufacturer}}}
Model {{{model}}}
Location [[{{{location}}}]]
GitHub / Repo {{{repo}}}
Status Active
Type Members Project
Live Status
QR code

Version 1 NH Antweight Rules

See RobotWars101 for the full Antweight rules and the FRA for general combat robotics rules in the UK. All of these rules/guidelines should be followed unless there is an exception below.

Weight Limit

  • The robot should weigh no more than 150g
  • If it weighs a bit more than 150g, then that's probably fine as long as you're not obviously cheating

Size Limit

  • There is no limit on the robot's dimensions (the 4" cube rule is not enforced)
  • If you are obviously trying to gain an advantage purely by making the robot gigantic, then you will need to be less obvious

Note: if you want to participate at other events around the UK, be aware that enforcement of the 4" cube varies a lot

Open Arena

  • All fights will take place without an enclosure
  • The following weapons are therefore not allowed:
    • Flywheels or other kinetic energy spinning weapons
    • Circular saws or drills
    • High-energy springs

This is not an exhaustive list and the marshal will review the safety of every robot during tech checks.

Recommended parts and build instructions

There are some great guides to building on the Bristol Bot Builders site, and they also sell antweight robot parts, including a complete antweight kit - this does require a suitable transmitter, or a paired transmitter/receiver though!

Alternatively, you can buy a complete, ready-to-drive antweight kit from Team SC or Nuts and Bots

For general advice there is some great information on the FRA and RW101 forums - these are not very active these days though, so if you have a specific question you may not get an answer for a few days/months/years.

There are some useful groups on Facebook, and this is probably a better bet if no one on the Slack channel can help:

... and finally, don't forget to keep in mind the rules from the FRA and RW101.

Inaugural Event - 30th of April 2022!

Attendees list
Roboteer Name Robot
Sam Roberts Twisted Lifter
Sam Roberts Chewdas Priest
Becky Dowson Thwack Sabbath
Simon Lindsay Alice Scooper
Steve Barnett Cheese Dreams
Steve Barnett Time For Crab!

Workshop Event 23rd July 2022

Read all about the workshop event here. This well-attended event was won by Mr Confusion.

Resources

Slideshow by McMullet from 23-03-2022