Arduino Due

Arduino Due
[[{{{image}}}|border|frameless|220px|center]]
Primary Contact	Michael Erskine
Created	2013-08-12
Completed	{{{completeddate}}}
Dormant	{{{dormantdate}}}
Version	{{{version}}}
Members	{{{members}}}
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	prototyping‎
Type	Undefined
Live Status	{{{livestatus}}}
QR code

The new Arduino Due board is the first Arduino to be based on an ARM Coretex M3 micro (rather than the usual AVR micro). This is still an Atmel chip but it will have more in common with the Mbed, LPCXpresso, etc. At time of writing I am still yet to receive my first Due board but I'm reliably informed that it's in the post!

So what is all the fuss about? Did you even notice any fuss? Well, it's a move away from the old AVR architecture and into a bigger arena. ARM is massive! What we, as Arduino users, get is an Arduino with a shed load more speed, and capacity. There are some potential downsides in the area of legacy Arduino convenience (e.g. the 3.3v logic) but these are small problems for those who appreciate the extra power.

Useful links in these early days:-

• http://arduino.cc/en/Main/ArduinoBoardDue
• Due Arduino forum: http://arduino.cc/forum/index.php/board,87.0.html
• Atmel's ARM page: http://www.atmel.com/arm/?sf13808117=1
• CMCIS standard for ARM Coretex: http://www.arm.com/products/processors/cortex-m/cortex-microcontroller-software-interface-standard.php
• BOSSA: http://www.shumatech.com/web/products/bossa
• Teensy 3 and Due: http://rcarduino.blogspot.fi/2012/09/arduino-due.html

This handy comparison table is from one of the sites above - not sure of the origin but I know that the 250k EEPROM for the Due is wrong as it doesn't have any!

	Arduino UNO	Arduino Mega	Arduino Due
MCU	ATMega 328	ATMega 2560	AT91SAM3X8E
Architecture	8 bit AVR	8 bit AVR	32 bit ARM Cortex M3
CPU Speed	16Mhz	16Mhz	84 Mhz
Flash Memory	32K	256K	512K
RAM	2K	8K	96K
EEPROM	1K	4K	250K
Digital Pins	14	54	54
PWM Pins	6	15	16
AnalogInputs	6	16	12
DAC	0	0	2

First Due Arrived

OK, Aug 15th 2013, and I've got my first Due clone: a nice red SainSmart Due (http://www.sainsmart.com/sainsmart-due-atmel-sam3x8e-arm-cortex-m3-board.html) for the bargain price of £25 (a UK ebay seller).

• Due with Mega
• 
  alongside Arduino Mega R3 and Renesas RSK+RX63N
• 
  alongside Arduino Mega R3

Pinout diagram: http://forum.arduino.cc/index.php?topic=132130.0

New Magic

The main new magic is a pair of USB sockets: "programming port" and "native port". We also have an "erase" button which looks scary!

I first set up the Arduino 1.5.2 zip install onto a Windows XP machine and had a jolly old time with the various CDC serial port drivers! After a while everything was pretty nice using the programming port for uploading code and running a small command terminal. I had to employ the while(!Serial); technique to get a reliable startup of my code.

There is a 12-bit DAC onboard and there are exciting new projects that demonstrate impressing WAV audio output. Combined with the 3.3v voltages for cheap SD card interfacing, we have a simple means for adding good quality audio to our projects.