MQTT Topics

This is the list of MQTT Topics that are use by the various HackSpace Instrumentation projects.

All of these are available on holly, and most are available on JARVIS via an MOTT/mosquitto bridge.

All topics should be prefixed with "nh/"

STATUS

nh/status/req
All clients should subscribe to this topic and listen for the message "STATUS"
Clients should respond on nh/status/res with their name and status.

Three states

• Restart:
• Running:
• Terminated:

ie. "Running: MatrixMQTT"

Include the : and a space before the clients name,

Current list of clients

• MatrixMQTT
• Gatekeeper (arduino)
• nh-irccat
• nh-irc
• nh-matrix
• GateKeeper (process)
• nh-irc-misc
• nh-temperature
• WorkshopMQTT
• nh-vend

The status of all running clients is logged and reported here http://lspace.nottinghack.org.uk/addr_graphs/status.php

Gatekeeper

Topic	Description	Notes
nh/gk/Unlock	Shows message on LCD / unlocks door	Not available on Jarvis
nh/gk/DoorState	"Door Opened", "Door Opened by:" or "Door Closed"
nh/gk/entry_announce/known	"Door Opened by: username (last seen xxx ago)"	Sent by Gatekeeper process on receiving "Door Opened by:"
nh/gk/entry_announce/unknown	"Door opened"	Sent by Gatekeeper process
nh/gk/Keypad	PIN entered	Not available on Jarvis
nh/gk/DoorButton	"OUTER", "INNER" or "REAR" for different doors	Doorbell. 1 ring=Inner, 2=Outer, 3=Rear
nh/gk/RFID	Serial of RFID card presented, or "Unknown Card Type"	Not available on Jarvis
nh/gk/LastManState	"First In" or "Last Out"	Knife switch by door. There is an intentional delay between the switch being thrown, and publishing to this topic

MatrixMQTT

Topic	Description	Notes
nh/mb/tx	nh-matrix script transmits messages to be displayed
nh/mb/rx	confirmation of displayed message is returned to nh-matrix

IRC Bot: nh-holly

Living in #nottinghack on freenode, nh-holly is our MQTT to IRC bridge

Topic	Description	Notes
nh/irc/tx	Sends to the default #nottinghack channel
nh/irc/tx/nottinghack	Sends to the #nottinghack channel
nh/irc/tx/pm/<nick>	Sends a pm to <nick>
nh/irc/rx/nottinghack/<nick>	Incoming message from irc #nottinghack channel
nh/irc/rx/pm/<nick>	Incoming pm from irc user <nick>

@Holly533MHz: nh-twitter

Twitter to MQTT bridge

Topic	Description	Notes
nh/twitter/tx
nh/twitter/rx/dm/<screen_name	DM to @Holly533Mhz from <Screen_name>
nh/twitter/rx/mention/<screen_name>	mention of @Holly533Mhz by <screen_name>
nh/twitter/rx/hs	latest tweet from @HSNOTTS includes retweets	payload <screen_name>:<text>

Temperature

Readings from DS18B20 1-Wire digital temperature sensors around the space are published at least every 2.5 minutes.
nh/temp
Message format as follows
address:temp

address	Hex string 16 long
temp	Float 00.00

Light Level

Currently only one LDR connected to WorkshopMQTT

Topic	Description
nh/lightlevel/workshop	Light level in the Workshop. > ~800 = lights are on

XRF & LLAP

LLAP message format
12 Char's
aXXDDDDDDDDD

• a start character
• XX Device ID
• DDDDDDDDD message

more detail can be found here:-

• LLAP http://openmicros.org/index.php/articles/85-llap-lightweight-local-automation-protocol/112-llap
• LLAP device details http://openmicros.org/index.php/articles/87-llap-devices-commands-and-instructions

Payload for MQTT message is upto 9byte's, the message part of LLAP, padding is automatically added and striped.
aNOHELLO----
becomes
nh/xrf/?x/NO HELLO

Topic	Description	Notes
nh/xrf/tx/XX	Send out a LLAP message	XX is DEVID
nh/xrf/rx/XX	LLAP message received	XX is DEVID

Lighting Automation

For more details see Lighting Automation/Control Software Note messages on nh/li/state/# should be set to retained. So new clients subscribing can retrieve the current state with out polling.

Topic	Description	Notes
nh/li/set/ROOM/ZONE	Lighting Command	ROOM is one of the pre defined rooms ZONE within a ROOM and payload is COMMAND
nh/li/state/ROOM/ZONE	Lighting State	Retained Topic! ROOM is one of the pre defined rooms ZONE within a ROOM and payload is Curent STATE