BarBot/Real-time software

From Nottinghack Wiki
Revision as of 11:49, 5 February 2019 by Danspencer101 (talk | contribs) (Danspencer101 moved page Project:BarBot/Real-time software to BarBot/Real-time software)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Real-time Software (hardware control)

BarBot's various dispensers will require some level of control.

Moving Platform

Although the design of the platform has yet to be prototyped, it is likely it will look something like the sideways axis of a RepRap - motion will be achieved using a stepper motor. In this case the software control should:

  1. Be able to move accurately to the correct location for a desired dispenser, i.e. "position 3"
  2. Accelerate gently to speed
  3. Decelerate gently to a halt at the correct location

Optic dispenser

TODO