MQTT Topics

From Nottinghack Wiki
Jump to navigation Jump to search

This is the list of MQTT Topics that are use by the various HackSpace Instrumentation projects.

All of these are available on holly, and most are available on JARVIS via an MQTT/mosquitto bridge.

All topics should be prefixed with "nh/"

STATUS

Topic Description Notes
nh/status/req Status Request topic "STATUS" message is sent out by nh-monitor
nh/status/res Status Reporting topic Used to respond to a request or just broadcast a new/change of state

All clients should subscribe to the `nh/status/req` topic and listen for the message "STATUS"
Clients should respond on `nh/status/res` with their name and status.

Three states

  • Restart:
  • Running:
  • Terminated:

ie. "Running: MatrixMQTT"

Include the : and a space before the clients name,

Current list of clients

  • MatrixMQTT
  • Gatekeeper (arduino)
  • nh-irccat
  • nh-irc
  • nh-matrix
  • GateKeeper (process)
  • nh-irc-misc
  • nh-temperature
  • WorkshopMQTT
  • nh-vend

The status of all running clients is logged and reported here https://hms.nottinghack.org.uk/instrumentation/status


Gatekeeper

Topic Direction (G=Gatekeeper Arduino, H=Gatekeeper process on Holly, B=Doorbell) Description Notes
nh/gk/<door id>/Unlock H > G Shows message on LCD / unlocks door Not available on Jarvis
nh/gk/<door id>/DoorState G > H "Door Opened", "Door Opened by:" or "Door Closed"
nh/gk/entry_announce/known H > (IRC, etc) "Door Opened by: username (last seen xxx ago)" Sent by Gatekeeper process on receiving "Door Opened by:"
nh/gk/entry_announce/unknown H > (IRC, etc) "Door opened" Sent by Gatekeeper process
nh/gk/<door id>/Keypad G > H PIN entered Not available on Jarvis
nh/gk/<door id>/DoorButton G > H "OUTER", "INNER" or "REAR" for different doors Message payload is unimportant
nh/gk/DoorButton H > (IRC/slack, etc) Door bell button pushed Message payload is the short name of the door (e.g. "INNER")
nh/gk/bell/<bell name> H > B Door bell in the given area Payload is the number of rings (1-3)
nh/gk/<door id>/RFID G > H Serial of RFID card presented, or "Unknown Card Type" Not available on Jarvis
nh/gk/LastManState G > H "First In" or "Last Out" Knife switch by door. There is an intentional delay between the switch being thrown, and publishing to this topic

MatrixMQTT

Topic Description Notes
nh/mb/tx nh-matrix script transmits messages to be displayed
nh/mb/rx confirmation of displayed message is returned to nh-matrix

IRC Bot: nh-holly

Living in #nottinghack on Libera Chat, nh-holly is our MQTT to IRC bridge

Topic Description Notes
nh/irc/tx Sends to the default #nottinghack channel
nh/irc/tx/nottinghack Sends to the #nottinghack channel
nh/irc/tx/pm/<nick> Sends a pm to <nick>
nh/irc/rx/nottinghack/<nick> Incoming message from irc #nottinghack channel
nh/irc/rx/pm/<nick> Incoming pm from irc user <nick>


Slack: nh-holly

Lives in various channels in the HSNOTTS team slack, nh-holly is our MQTT to slack bridge

Topic Description Notes
nh/slack/tx Sends payload to #activity channel
nh/slack/tx/<channel> Sends to #<channel> Bot must be invited into channel first
nh/slack/tx/pm/<nick> Sends a direct message to <nick>
nh/slack/rx/<channel>/<nick> Incoming message from #<channel>
nh/slack/rx/pm/<nick> Incoming direct message from <nick>

@Holly533MHz: nh-twitter

Twitter to MQTT bridge

Topic Description Notes
nh/twitter/tx
nh/twitter/rx/dm/<screen_name DM to @Holly533Mhz from <Screen_name>
nh/twitter/rx/mention/<screen_name> mention of @Holly533Mhz by <screen_name>
nh/twitter/rx/hs latest tweet from @HSNOTTS includes retweets payload <screen_name>:<text>

Temperature

Readings from DS18B20 1-Wire digital temperature sensors around the space are published at least every 2.5 minutes.
nh/temp

Topic Description
nh/temp Sensors should regularly publish readings to this topic as `address:temp` (see below)
nh/temperature/{name} nh-temperature republishes temps to the topic with a friendly name


Message format as follows
address:temp

address Hex string 16 long
temp Float 00.00

Light Level

Currently only one LDR connected to WorkshopMQTT

Topic Description
nh/lightlevel/workshop Light level in the Workshop. > ~800 = lights are on

Tools RFID access control: Nhtools

Tools access control module. See Nhtools for a better description of these messages.

Topic Description (A=Arduino, S=Server) Notes
nh/tools/<tool name>/AUTH A > S: RFID card presented payload is RFID serial
nh/tools/<tool name>/GRANT S > A: RFID card belongs to a member who has been inducted on the tool - enable power
nh/tools/<tool name>/DENY S > A: Sign on request denied payload is the reason (e.g. not inducted)
nh/tools/<tool name>/COMPLETE A > S: Tool sign off
nh/tools/<tool name>/INDUCT A > S: Request to induct member payload is signed on RFID card + RFID of member to induct
nh/tools/<tool name>/ISUC S > A: Induction successful
nh/tools/<tool name>/IFAL S > A: Induction failed (e.g. unknown card) payload is failure reason
nh/tools/<tool name>/RESET A > S: Arduino has either just booted, or has reconnected Payload is cause

Tools bookings

This provides limited details of tool bookings made via HMS. When a booking is made from HMS, a push notification is received from google for the underlying google calendar, which results in a poll message being sent with the payload set to tool name that's been updated. The nh-tools process then downloads the ICAL formatted calendar from google, and publishes the now/next booking to the booking topic.

Topic Description Notes
nh/bookings/<tool name>/nownext Now and next booking information for <tool name> Payload is JSON encoded, see below.
nh/bookings/poll Request to poll google for updated calendar data, then publish to nownext topic Payload is tool name

Example payload for nownext message: 

{
  "now":{
     "display_time":"now",
     "display_name":"<member name1>"
  },
  "next":{
     "display_time":"10:30",
     "display_name":"<member name2>"
  }
}

For the nownext message payload, bookings which start more that 20hrs in the future are ignored to remove ambiguity in the time displayed.


Network Devices

A count of the number of network devices currently connected (results of a minutely ARP scan).

Topic Description
nh/addr/known Number of known/fixed network devices (e.g. printers, VM's, etc).
nh/addr/unknown Number of unknown network devices (e.g. members laptops).

Wireless Things LLAP

Topic Description Notes
nh/llap/tx/XX Send out a LLAP message XX is DEVID
nh/llap/rx/XX LLAP message received XX is DEVID
nh/llap/messagebridge/listen JSON of LLAP message received Also broadcast on UDP 50140
nh/llap/messagebridge/send JSON to Send out a LLAP message Can also be sent broadcast on UDP 50141

LLAP Messages

LLAP message format
12 Char's
aXXDDDDDDDDD

  • a start character
  • XX Device ID
  • DDDDDDDDD message

more detail can be found here:-

Payload for MQTT message is upto 9byte's, the message part of LLAP, padding is automatically added and striped.
aNOHELLO----
becomes
nh/llap/?x/NO HELLO

Message Bridge

For the MessageBridge JSON details see:-
https://github.com/WirelessThings/WirelessThings-LaunchPad/blob/master/Documentation/ExampleJSONMessages.json

Lighting Automation

For more details see Lighting Automation/Control Software
Note the `set` and `sate` topics are detailed here for reference only since only the nh-lighting software running on queen should be the only thing to interact with them, custom projects wishing to interact with the light should use the web socket protocol exposed via nh-lighting on ws://queen:8181/lighting (subprotocol 'lighting')

Topic Description Notes
nh/li/{controllerName}/{channel}/set Lighting Command Only for channels 00-23 on v2 controllers and 00-31 on v3 controllers, Payload can be one of [ON, OFF, TOGGLE]
nh/li/{controllerName}/{channel}/state Lighting State Retained Topic! Current state of the channel [ON, OFF]
nh/li/{controllerName}/EM/Voltage V
nh/li/{controllerName}/EM/Current A
nh/li/{controllerName}/EM/Power Kw
nh/li/{controllerName}/EM/ReactivePower Var
nh/li/{controllerName}/EM/PowerFactor
nh/li/{controllerName}/EM/Frequency Hz
nh/li/{controllerName}/EM/TotalActivePower Kwh
nh/li/{controllerName}/EM/TotalReactivePower Kvarh

{channel}
00-31 represent the output channels, note only 00-23 on v2 controllers
I0-I7 are the local input channels Ixxyy are rs485 input channels. Where 'xx' is the (node id + 10) and 'yy' is the channel 00-15 (v3 controller only)

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=MQTT_Topics&oldid=26684"