DIY Laser/Frame

From Nottinghack Wiki
< DIY Laser
Revision as of 00:07, 20 February 2019 by Danspencer101 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The information on this page is NOT current. It retained for historical or archival purposes only. (January 2013)

Frame size is dependent on XY Gantry size, which is dependent on the bed size.

Extrusion

The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.

The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=DIY_Laser/Frame&oldid=17977"