Spider Geocache
| Spider Geocache | |
|---|---|
 | |
| Primary Contact | Danspencer101 |
| Created | 17/03/2019 |
| Status | In Progress |
| Type | Members Project |
| QR code | |
This geocache is a 3D printed cache to replace one that went missing on a trail I maintain in Derby. The waterproof part that will hold the log sheet is a 1.2ml phial so it will be classed as a micro cache.
Modelling
The cache is based upon a spider model that I found on thingiverse. I originally printed this without the base but got reports that the leg snapped off after it being outside for less than a week so decided to add it in. I was also struggling with the legs detaching from the bed due to poor adhesion; the base solved this problem.
I modified the STL file by putting a hole on the underside to press fit the Phial into and added a base that strengthens the spiders legs.
3D Print
Printed on my Creality CR-10s at home overnight simply because it took about 9hrs to print and I didn't want to stay with our 3D Printer for that length of time.
-
First Layer -
Halfway through
Assembly
I removed the supports & press fitted the phial into the hole with a drop of super glue to lock it in place.
In addition I put a dab of super glue on to the foot of each leg to further strengthen the weak point.
-
Push fit the container -
Drop of glue on each leg
Paint
I painted everything black using a BBQ paint rattle can. Looks great and is ready to hide.
