Fantasy Football Trophy
Revision as of 23:39, 7 September 2019 by Danspencer101 (talk | contribs) (Created page with "{{Project |image=File:FFTrophy 2.jpg |name=Fantasy Football Trophy |primary=Danspencer101 |created=2019/08/16 |completeddate=2019/08/30 |dormantdate= |v...")
Fantasy Football Trophy | |
---|---|
Primary Contact | Danspencer101 |
Created | 2019/08/16 |
Completed | 2019/08/30 |
Status | Complete |
Type | Members Project |
QR code |
A quick and dirty project I did for some friends at work. Turned out being a little harder than I thought it would've due to difficulties painting the design.
Attempt 1
I used Superbox CNC Router to cut the design into the block before painting. This was disastrous as I couldn't fill the design with paint after I'd sprayed it purple. Ended up being very messy so I scrapped it.
Attempt 2
Attempt two used the Laser Cutter. I started by spraying the entire block purple and applied a laser mask to the top face once it had dried.
- I then used the laser cutter to engrave the mask away, leaving a gap where the design needed to go.
- I then sprayed over the mask with white paint.
- I removed the mask to achieve the clean finish that I was looking for.