Difference between revisions of "Denford Lathe"
m (→Looks Like) |
(Added some references and manual) |
||
| Line 3: | Line 3: | ||
A benchtop Denford Novaturn CNC lathe | A benchtop Denford Novaturn CNC lathe | ||
| − | + | [[File:WDenfordNovaturn.JPG|The Denford CNC Lathe]] | |
| + | |||
| + | The novaturn lathe has been in the space for some time and has had very little use to date | ||
| + | it is NOT a scary hard to use machine and is avaialble for use by any member without induction. | ||
| + | |||
| + | Obviously take care when using, if you are unsure of anything ASK SOMEONE, a a good place to ask is the | ||
| + | google group. If you have never used a Lathe or CNC machine at all before the learning curve can be a little | ||
| + | steep but should be manageable. | ||
| − | [ | + | There are a number of good 'howto' videos on youtube |
| + | See https://www.youtube.com/watch?v=aBuMs5Uk_7Y | ||
| + | and https://www.youtube.com/watch?v=XUYUBSZGmA4 | ||
| + | |||
| + | The lathe used is the same as ours except that we have a 8 position automatic tool changer. | ||
| + | |||
| + | The novaturn software has a simulation mode' that lets you program a part an run it on the computer only | ||
| + | to check all is well before you actually cut it out for real. This gives an easy confidence boost. | ||
| + | |||
| + | Other reference: | ||
| + | Novaturn Manual is available [https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiD_tvRgf_QAhWFdlAKHXC_AmIQFggaMAA&url=https%3A%2F%2Fwiki.edinburghhacklab.com%2F_media%2Fnovaturn_vr_manual.pdf&usg=AFQjCNEVDrFR0QXGoAIpGw5YhILL_dzY1Q&sig2=GClXnm81vXzTnq9GrxQy5g HERE] | ||
Revision as of 00:40, 19 December 2016
 |
This page is a stub. You can help by expanding it! This page is included in the list of stub pages. |
Dclarke (talk) 08:56, 28 January 2014 (EST)
A benchtop Denford Novaturn CNC lathe
The novaturn lathe has been in the space for some time and has had very little use to date it is NOT a scary hard to use machine and is avaialble for use by any member without induction.
Obviously take care when using, if you are unsure of anything ASK SOMEONE, a a good place to ask is the google group. If you have never used a Lathe or CNC machine at all before the learning curve can be a little steep but should be manageable.
There are a number of good 'howto' videos on youtube See https://www.youtube.com/watch?v=aBuMs5Uk_7Y and https://www.youtube.com/watch?v=XUYUBSZGmA4
The lathe used is the same as ours except that we have a 8 position automatic tool changer.
The novaturn software has a simulation mode' that lets you program a part an run it on the computer only to check all is well before you actually cut it out for real. This gives an easy confidence boost.
Other reference: Novaturn Manual is available HERE