Fantasy Football Trophy
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Fantasy Football Trophy | |
---|---|
Primary Contact | Danspencer101 |
Created | 2019/08/16 |
Completed | 2019/08/30 |
Status | Complete |
Type | Members Project |
QR code |
A quick and dirty project I did for some friends at work. Turned out being a little harder than I thought it would've due to difficulties painting the design.
Attempt 1
I used Superbox CNC Router to cut the design into the block before painting. This was disastrous as I couldn't fill the design with paint after I'd sprayed it purple. Ended up being very messy so I scrapped it.
Attempt 2
Attempt two used the Laser Cutter. I started by spraying the entire block purple and applied a laser mask to the top face once it had dried.
- I then used the laser cutter to engrave the mask away, leaving a gap where the design needed to go.
- I then sprayed over the mask with white paint.
- I removed the mask to achieve the clean finish that I was looking for.