Difference between revisions of "File:Laserrubber3.jpeg"

Latest revision as of 20:02, 7 March 2012

Photos of the Laser cut rubber stamps I made at Nottinghack

The rubber being cut on the laser cutter

2012-03-06 16:51:03

Matt Little

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	20:02, 7 March 2012		653 × 490 (46 KB)	Chunky (talk \| contribs)

You cannot overwrite this file.

The following 2 pages use this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Panasonic
Camera model	DMC-FS6
Exposure time	1/50 sec (0.02)
F Number	f/2.8
ISO speed rating	1,600
Date and time of data generation	16:51, 6 March 2012
Lens focal length	5.5 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
Software used	Ver.1.0
File change date and time	16:51, 6 March 2012
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	16:51, 6 March 2012
Image compression mode	4
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Light source	Tungsten (incandescent light)
Flash	Flash did not fire, compulsory flash suppression
Color space	sRGB
Sensing method	One-chip color area sensor
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Manual white balance
Digital zoom ratio	0
Focal length in 35 mm film	33 mm
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal