Laser cutter/Inductions

Induction on the laser Cutter/Engraver

In early October 2011 I will be conducting Induction Sessions on the new Laser Cutter Engraver at the Nottingham Hackspace. These are likely to happen in the Blue Room and will be one-on-one sessions. You may bring a small laser project if you wish though you must check that your materials are suitable for a laser cutting or etching. Otherwise we'll cut some paper/card/ply for you to show that you aren't going to destroy the laser.

There will be a small charge for ongoing use of the laser (tba) as well as costs for laser-able materials though of course you are welcome to bring your own (within guidelines).

The laser will be collected on Saturday 24th September, though it will not be available for general use until early October.

I will also be arranging an access diary for the laser and some simple rules of thumb. Shortly I will post online tutorials too.

Laser Induction Sign-Ups

#	Name	Paid	When	Complete
1	Spencer	YES	TBA	NO
2	James H	NO	TBA	NO
3	David	NO	TBA	NO
4	Mouse	NO	TBA	NO
5	Suzanne	NO	TBA	NO
6	AJ	NO	TBA	NO
7	Ben	NO	TBA	NO
8	Tony	NO	TBA	NO
9	Jake	NO	TBA	NO
10	Joe	NO	TBA	NO
11	RepRap Matt	NO	N/A	YES
12	Chunky	NO	TBA	NO
13	Michael E	NO	TBA	NO
14	Sharpie	NO	TBA	NO
15	James F	YES	TBA	NO
16	Mark	NO	TBA	NO
17	Pip	NO	TBA	NO
18	John	NO	TBA	NO
19	Ross	NO	TBA	NO
20	?	NO	TBA	NO