Laser cutter/Inductions

From Nottinghack Wiki
Jump to navigation Jump to search

Induction on the laser Cutter/Engraver

In early October 2011 I will be conducting Induction Sessions on the new Laser Cutter Engraver at the Nottingham Hackspace. These are likely to happen in the Blue Room and will be one-on-one sessions. You may bring a small laser project if you wish though you must check that your materials are suitable for a laser cutting or etching. Otherwise we'll cut some paper/card/ply for you to show that you aren't going to destroy the laser.

There will be a small charge for ongoing use of the laser (tba) as well as costs for laser-able materials though of course you are welcome to bring your own (within guidelines).

The laser will be collected on Saturday 24th September, though it will not be available for general use until early October.

I will also be arranging an access diary for the laser and some simple rules of thumb. Shortly I will post online tutorials too.

Laser Induction Sign-Ups

# Name Paid When Complete
1 Spencer YES TBA NO
2 James H NO TBA NO
3 David NO TBA NO
4 Mouse NO TBA NO
5 Suzanne NO TBA NO
6 AJ NO TBA NO
7 Ben NO TBA NO
8 Tony NO TBA NO
9 Jake NO TBA NO
10 Joe NO TBA NO
11 RepRap Matt NO N/A YES
12 Chunky NO TBA NO
13 Michael E NO TBA NO
14 Sharpie NO TBA NO
15 James F YES TBA NO
16 Mark NO TBA NO
17 Pip NO TBA NO
18 John NO TBA NO
19 Ross NO TBA NO
20 ? NO TBA NO