Difference between revisions of "Project:Arduino SD Card"
Jump to navigation
Jump to search
(Created page with "I'd like a nice way of storing masses of data for easy access from the Arduino. I'd also like a nice way to log data from the Arduino. SD card shields are nice but kinda pricey. ...") |
m |
||
| Line 2: | Line 2: | ||
* 6 resistor SD card adapter: http://didier.longueville.free.fr/arduinoos/?p=51 | * 6 resistor SD card adapter: http://didier.longueville.free.fr/arduinoos/?p=51 | ||
| − | * Micro SD card adapters are about 10p so you can just solder pins onto the contacts | + | * as well as the voltage divider technique to get 3.3v signals, I've seen that some of the cheap Chinese SD card adapters have an on-board 3.3v regulator and use 10k pullups to the 3.3v line |
| − | * | + | * Micro SD card adapters are about 10p - no point in not destroying one so you can just solder pins onto the contacts |
| + | ** I used angled headers so I can hotmelt glue the adapter down to make it more sturdy for card insertion and removal | ||
| + | * I want my applications to be safe for card removal whilst powered up | ||
| + | * the 3.3v supply on a genuine Arduino Duemilanove or UNO is handy but I also want to use these on a Xino that has no 3.3v rail (due to no FTDI or equivalent on board) | ||
Revision as of 09:44, 7 May 2012
I'd like a nice way of storing masses of data for easy access from the Arduino. I'd also like a nice way to log data from the Arduino. SD card shields are nice but kinda pricey. I think I can do it on the cheap so I'm gonna have a go.
- 6 resistor SD card adapter: http://didier.longueville.free.fr/arduinoos/?p=51
- as well as the voltage divider technique to get 3.3v signals, I've seen that some of the cheap Chinese SD card adapters have an on-board 3.3v regulator and use 10k pullups to the 3.3v line
- Micro SD card adapters are about 10p - no point in not destroying one so you can just solder pins onto the contacts
- I used angled headers so I can hotmelt glue the adapter down to make it more sturdy for card insertion and removal
- I want my applications to be safe for card removal whilst powered up
- the 3.3v supply on a genuine Arduino Duemilanove or UNO is handy but I also want to use these on a Xino that has no 3.3v rail (due to no FTDI or equivalent on board)