Difference between revisions of "Small CRT MAME Cabinets"
Jump to navigation
Jump to search
m (→Cabinet) |
m (→CRT) |
||
| Line 9: | Line 9: | ||
* the heaviest and bulkiest item | * the heaviest and bulkiest item | ||
** the position of the monitor high up in a floor-standing cabinet will require a very stable cabinet design (not on wheels unless really well thought out!) | ** the position of the monitor high up in a floor-standing cabinet will require a very stable cabinet design (not on wheels unless really well thought out!) | ||
| + | * Raspberry Pi RCA output from 3.5mm jack: http://www.ebay.com/itm/Jack-to-3-RCA-Adapter-Cable-Audio-Video-AV-3-5mm-Jack-TV-Cable-Cord-Wire-Adapter/111852720137 | ||
== Cabinet == | == Cabinet == | ||
Revision as of 10:37, 4 July 2016
Overview
A chance haul of brand new free 15" CCTV CRT monitors (x5) has sparked my desire to design and build a standardised small MAME cabinet to fit them and to make the design available to anyone who wants to take part.
CRT
- The heart of the project
- the most expensive single item
- the heaviest and bulkiest item
- the position of the monitor high up in a floor-standing cabinet will require a very stable cabinet design (not on wheels unless really well thought out!)
- Raspberry Pi RCA output from 3.5mm jack: http://www.ebay.com/itm/Jack-to-3-RCA-Adapter-Cable-Audio-Video-AV-3-5mm-Jack-TV-Cable-Cord-Wire-Adapter/111852720137
Cabinet
- hefty chipboard bases and 2x4's as per the big cabinet
- laser etched outlines where possible
- laminated panels made to fit quality T-molding
Major purchase BOM
- http://www.arcadeworlduk.com/categories/Arcade-Parts/T-Molding/
- Zippyy joysticks, buttons, encoders, etc.