File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | User | Description | Versions |
---|---|---|---|---|---|---|
10:10, 10 July 2019 | ANYCUBIC-Photon-SLA-DLP-3D-Printer-UV-Resin.jpg (file) | 16 KB | Daves | 1 | ||
12:20, 4 July 2019 | Coin Casting (8).PNG (file) | 408 KB | Danspencer101 | Close up of the other side | 1 | |
12:20, 4 July 2019 | Coin Casting (7).PNG (file) | 377 KB | Danspencer101 | Close up of one side | 1 | |
12:19, 4 July 2019 | Coin Casting (6).JPG (file) | 1.46 MB | Danspencer101 | The castings after a quick emery dress & polish. | 1 | |
12:18, 4 July 2019 | Coin Casting (5).JPG (file) | 1.59 MB | Danspencer101 | The complete pewter castings. Note that the air bleeds have filled with metal indicating that they are too large. | 1 | |
12:17, 4 July 2019 | Coin Casting (4).JPG (file) | 848 KB | Danspencer101 | The aluminium mould clamped up and ready for pouring | 1 | |
12:16, 4 July 2019 | Coin Casting (3).JPG (file) | 656 KB | Danspencer101 | The complete mould with alignment dowels installed. All of the burrs on the edge have been removed and a small chamfer added to the sides that will enable the mould to be pulled apart. | 1 | |
12:15, 4 July 2019 | Coin Casting (2).JPG (file) | 1.02 MB | Danspencer101 | Milling the Mould - 2mm Ball Nose | 1 | |
12:14, 4 July 2019 | Coin Casting (1).JPG (file) | 732 KB | Danspencer101 | Milling the mould - 6mm Flat End Mill | 1 | |
23:28, 28 June 2019 | 1 Vader die cavity.PNG (file) | 492 KB | Danspencer101 | 1 | ||
23:24, 28 June 2019 | 2 Vader die cavity.PNG (file) | 512 KB | Danspencer101 | 1 | ||
21:06, 28 June 2019 | 20190612085853!20190608 010705.jpg (file) | 2.54 MB | Danspencer101 | Sewing machines in textiles room | 1 | |
17:09, 28 June 2019 | Darth Vader Cast 9.jpg (file) | 722 KB | Danspencer101 | The spent halves of the mould | 1 | |
17:08, 28 June 2019 | Darth Vader Cast 8.jpg (file) | 712 KB | Danspencer101 | Failed casting. At this point (3 castings) the mould was spent. If we used mould release/ graphene powder between each cast it would have lasted longer. | 1 | |
17:03, 28 June 2019 | Darth Vader Cast 7.jpg (file) | 704 KB | Danspencer101 | Polished up casting | 1 | |
17:00, 28 June 2019 | Darth Vader Cast 6.jpg (file) | 804 KB | Danspencer101 | The castings straight out of the mold | 1 | |
16:12, 28 June 2019 | Darth Vader Cast 5.jpg (file) | 756 KB | Danspencer101 | Pouring the metal into the mold | 1 | |
16:11, 28 June 2019 | Darth Vader Cast 4.jpg (file) | 819 KB | Danspencer101 | Clamping the 2 part MDF mold shut using a quick clamp. | 1 | |
16:08, 28 June 2019 | Darth Vader Cast 3.jpg (file) | 719 KB | Danspencer101 | Melting the Pewter in the electric crucible. Target pouring temp: 260°c. | 1 | |
16:06, 28 June 2019 | Darth Vader Cast 2.jpg (file) | 662 KB | Danspencer101 | The complete mold cavities in MDF. Covered in a thin layer of Graphite from a sanded pencil. | 1 | |
16:05, 28 June 2019 | Darth Vader Cast 1.jpg (file) | 772 KB | Danspencer101 | Routing out the mold in MDF | 1 | |
18:20, 27 June 2019 | Hackwiki.svg (file) | 6 KB | Jon | white fill H | 2 | |
20:48, 25 June 2019 | Logo Cura.png (file) | 7 KB | Danspencer101 | Source: https://www.createeducation.com/which-software/ | 1 | |
11:09, 25 June 2019 | Inkscape Logo.png (file) | 82 KB | Danspencer101 | Author=Andrew Michael Fitzsimon Source=https://inkscape.org/en/~inkscape/%E2%98%85inkscape-official-logo-vector | 1 | |
11:02, 25 June 2019 | Skannect Logo.png (file) | 31 KB | Danspencer101 | Source: https://skanect.occipital.com/ | 1 | |
10:54, 25 June 2019 | Logo Meshmixer.png (file) | 15 KB | Danspencer101 | Source: http://www.meshmixer.com/images/mm_logo.png | 1 | |
10:40, 25 June 2019 | BAT BOX-WAG-2016.jpg (file) | 543 KB | Danspencer101 | Source: [https://www.nottinghamshirewildlife.org/get-involved/how-you-can-get-involved/wildlife-gardening/how-make-bat-box] | 1 | |
07:47, 25 June 2019 | Monoprice.jpg (file) | 85 KB | Jon | Monoprice piccy for pledge | 1 | |
22:38, 23 June 2019 | Bat Box - Finished 2.jpg (file) | 457 KB | Danspencer101 | 1 | ||
22:37, 23 June 2019 | Bat Box - Finished 1.jpg (file) | 379 KB | Danspencer101 | 1 | ||
22:36, 23 June 2019 | Bat Box - Layout 2.jpg (file) | 2.08 MB | Danspencer101 | 1 | ||
22:36, 23 June 2019 | Bat Box - Layout 1.jpg (file) | 708 KB | Danspencer101 | 1 | ||
00:42, 18 June 2019 | Plumb Bob Drawing v4.pdf (file) | 223 KB | Danspencer101 | 1 | ||
00:39, 18 June 2019 | Plumb Bob Drawing v4-3.jpg (file) | 199 KB | Danspencer101 | 1 | ||
00:39, 18 June 2019 | Plumb Bob Drawing v4-2.jpg (file) | 212 KB | Danspencer101 | 1 | ||
00:38, 18 June 2019 | Plumb Bob Drawing v4-1.jpg (file) | 280 KB | Danspencer101 | 1 | ||
16:06, 15 June 2019 | CNC Workshop (Basic) (28).jpg (file) | 569 KB | Danspencer101 | 1 | ||
16:05, 15 June 2019 | CNC Workshop (Basic) (27).jpg (file) | 550 KB | Danspencer101 | 1 | ||
16:05, 15 June 2019 | CNC Workshop (Basic) (26).jpg (file) | 562 KB | Danspencer101 | 1 | ||
09:37, 15 June 2019 | DanS Plumb Bob 2.jpg (file) | 452 KB | Danspencer101 | 1 | ||
09:36, 15 June 2019 | DanS Plumb Bob 1.jpg (file) | 519 KB | Danspencer101 | 1 | ||
23:16, 13 June 2019 | Hackspace Geocoin Design.gif (file) | 513 KB | Danspencer101 | 1 | ||
22:41, 13 June 2019 | Nottinghack Geocoin (7).jpg (file) | 517 KB | Danspencer101 | 1 | ||
22:40, 13 June 2019 | Nottinghack Geocoin (6).jpg (file) | 981 KB | Danspencer101 | 1 | ||
22:40, 13 June 2019 | Nottinghack Geocoin (5).jpg (file) | 653 KB | Danspencer101 | 1 | ||
22:39, 13 June 2019 | Nottinghack Geocoin (4).jpg (file) | 2.82 MB | Danspencer101 | 1 | ||
22:39, 13 June 2019 | Nottinghack Geocoin (3).jpg (file) | 899 KB | Danspencer101 | 1 | ||
22:38, 13 June 2019 | Nottinghack Geocoin (2).jpg (file) | 658 KB | Danspencer101 | 1 | ||
22:38, 13 June 2019 | Nottinghack Geocoin (1).jpg (file) | 463 KB | Danspencer101 | 1 | ||
08:58, 12 June 2019 | 20190608 010705.jpg (file) | 2.62 MB | Cazzhall | Embroidery Machine area in the textiles room | 2 |