Talk:Inkscape

From Nottinghack Wiki
Revision as of 22:51, 22 June 2019 by Danspencer101 (talk | contribs) (Danspencer101 moved page Talk:Laser cutter/Inkscape to Talk:Inkscape: Seperate from laser cutter parent as its software in its own right)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Put some stuff in here about the outline view, and having zero thickness lines perhaps? - James

  • Totally should, best practices like that are useful, need to figure out the best combination of options since I don't know yet the laser width (which essentially should be the line width). - Andrew Armstrong (talk) 12:25, 30 May 2014 (UTC)
  • The width of the beam is known as the laser kerf, I've read it varies quite a bit depending on the material and thickness but is typically 0.08mm – 0.45mm Robert (talk) 21:42, 4 June 2014 (UTC)