TourRobot

From Nottinghack Wiki
Revision as of 21:13, 27 November 2013 by Chunky (talk | contribs)
Jump to navigation Jump to search
TourRobot
[[{{{image}}}|border|frameless|220px|center]]
Primary Contact Matt Little
Created {{{created}}}
Completed {{{completeddate}}}
Dormant {{{dormantdate}}}
Version {{{version}}}
Members {{{members}}}
Manufacturer {{{manufacturer}}}
Model {{{model}}}
Location [[{{{location}}}]]
GitHub / Repo {{{repo}}}
Status {{{status}}}
Type Undefined
Live Status {{{livestatus}}}
QR code

Giving tours around the hackspace takes time and effort. So the obvious solution is to build a robot to do it. Here are the details and build log.

Start 27/11/13 Basic base is the blue robot from Real Robots Magazine. I got this from a car boot sale and, at the first Arduino 101 day I fixed my arduino base to the robot. There is loads of detail on the Lpilsley Cybot here.

The Arduino is a Duemilanova with an ATMega328. I might updrage to an Uno if needed.

The motor control unit has been left in to power the motors. Details on the circuit diagram are here.

An audio module MOD-1007 from Embedded Adventures has been added for the tour audio. This uses 3v3, which is taken from the Arduino, although for high volumes this does not have enough current. A seperate regulator might be required. Follow the data sheet to see how to play different files using the serial data lines.

Distance is found using ultrasonic sensors re-purposed from the original Real Robot. These have circuit diagrams here.


There is also a line follower with a circuit diagram here.



Arduino Pins

Digital:

0 -> Rx

1 -> Tx

2 -> Motor 1 Forward

3 -> Motor 1 Backward

4 -> Motor 2 Forward

5 -> Motor 2 Backward

6

7

8

9

10

11 -> RESET Sound Module

12 -> CLOCK Sound Module

13 -> SDATA Sound Module


Analog

A0 -> LDR 1

A1 -> LDR 2

A2

A3

A4

A5