Wood lathe

From Nottinghack Wiki
Revision as of 23:47, 27 February 2019 by Danspencer101 (talk | contribs)
Jump to navigation Jump to search
Wood lathe
Tool Wood Lathe.jpg
Manufacturer Generic Chinese
Model Similar to Charnwood 813
Obtained Member Donation[clarify]
Location Dusty Area
Team Woodworking
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}

The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.

The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.


The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.

Make sure that the chuck is tightened with tools before use.

Note Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.

Instruction Manual