Difference between revisions of "Workshop Power"
(Improvements to power supply in workshop area of the Hackspace.) |
|||
| Line 5: | Line 5: | ||
= Project: Workshop Power = | = Project: Workshop Power = | ||
| − | + | This project is to install 3 phase power in the workshop area of the Hackspace, to replace the use of a temporary flexible cable which can only feed one item at a time. | |
| − | + | ||
| + | We already have the Bridgeport Mill and a Donkey Saw which require 3phase power, but with the installation of proper infrastructure we will be able to run more powerful welders (TIG and Arc), and other tools we may get. | ||
| + | |||
| + | We also need 3phase to run a motor / fan that we have for dust extraction. | ||
| + | In addition to 3phase power, some higher-current single phase outlets are needed for welding equipment that we have. Including these in the project will reduce the reliance on 'domestic' 13A sockets for these items. | ||
| + | |||
| + | |||
| + | Key Dates: | ||
| + | Creation of project page 21st August 2013 | ||
| + | |||
link to mailing list or somesuch | link to mailing list or somesuch | ||
== Project Contacts == | == Project Contacts == | ||
| − | * David Clarke | + | * David Clarke (Page creation, general guidance as to project direction) |
| − | * Matt Lloyd | + | * Matt Lloyd (interest in metalworking area tooling, and installation of the wiring) |
* [[User:some_third_person]] | * [[User:some_third_person]] | ||
| Line 18: | Line 27: | ||
Power requirements of tools we have | Power requirements of tools we have | ||
| + | |||
| + | Bridgeport Mill (16A / 3phase) | ||
| + | |||
| + | TIG welder (70A / Single phase 415V) | ||
| + | |||
| + | Extraction fan motor | ||
Power requirement of tools we might get | Power requirement of tools we might get | ||
Length of supply cable | Length of supply cable | ||
| + | |||
| + | 30 metres from the main switch area (cupboard in the Blue Room) along the South wall to the Workshop area. (N.B. needs checking, as this cable is available cut to the metre length) | ||
Outlets required | Outlets required | ||
| + | |||
| + | 16A/3 for Bridgeport | ||
| + | 16A/3 for Donkey Saw | ||
| + | Direct wiring to distribution board for TIG welder | ||
| + | 32A/2 for Arc welder (guess, but we have these connectors already from Bridgeport) | ||
| + | 16A/3 for Dust fan | ||
| + | 16A/1 for MIG welder | ||
Other stuff | Other stuff | ||
| − | Some photos perhaps? | + | We have a quantity of donated cable, which was originally used to connect the 16A/3 socket outlets that we have. As this is 'old colours' it is probably best to scrap this (could get £90) and use the money to fund the purchase of modern multicore flexible for the socket wiring around the workshop. |
| + | |||
| + | == Costings == | ||
| + | |||
| + | Distribution board and MCBs - Donated, though we may need some different MCBs | ||
| + | 3phase 16A socket outlets - Donated, though these are non-switched. Otherwise £20 each, or £10 to add switches. | ||
| + | 30 metres of 10mm² SWA 4-core cable + glands £130 | ||
| + | Single-phase 16A socket outlets from £7 (http://chaloncomponents.co.uk/shop/article_GW62477/GW62477.html) | ||
| + | Single-phase RCCDOs we have. | ||
| + | |||
| + | Some photos perhaps? Awaiting these. | ||
<gallery> | <gallery> | ||
| Line 35: | Line 69: | ||
</gallery> | </gallery> | ||
| − | Page based on suggested by Michael Erskine | + | Page based on template suggested by Michael Erskine |
Revision as of 12:07, 21 August 2013
Project: Workshop Power
This project is to install 3 phase power in the workshop area of the Hackspace, to replace the use of a temporary flexible cable which can only feed one item at a time.
We already have the Bridgeport Mill and a Donkey Saw which require 3phase power, but with the installation of proper infrastructure we will be able to run more powerful welders (TIG and Arc), and other tools we may get.
We also need 3phase to run a motor / fan that we have for dust extraction. In addition to 3phase power, some higher-current single phase outlets are needed for welding equipment that we have. Including these in the project will reduce the reliance on 'domestic' 13A sockets for these items.
Key Dates:
Creation of project page 21st August 2013
link to mailing list or somesuch
Project Contacts
- David Clarke (Page creation, general guidance as to project direction)
- Matt Lloyd (interest in metalworking area tooling, and installation of the wiring)
- User:some_third_person
Other Stuff
Power requirements of tools we have
Bridgeport Mill (16A / 3phase)
TIG welder (70A / Single phase 415V)
Extraction fan motor
Power requirement of tools we might get
Length of supply cable
30 metres from the main switch area (cupboard in the Blue Room) along the South wall to the Workshop area. (N.B. needs checking, as this cable is available cut to the metre length)
Outlets required
16A/3 for Bridgeport 16A/3 for Donkey Saw Direct wiring to distribution board for TIG welder 32A/2 for Arc welder (guess, but we have these connectors already from Bridgeport) 16A/3 for Dust fan 16A/1 for MIG welder
Other stuff
We have a quantity of donated cable, which was originally used to connect the 16A/3 socket outlets that we have. As this is 'old colours' it is probably best to scrap this (could get £90) and use the money to fund the purchase of modern multicore flexible for the socket wiring around the workshop.
Costings
Distribution board and MCBs - Donated, though we may need some different MCBs 3phase 16A socket outlets - Donated, though these are non-switched. Otherwise £20 each, or £10 to add switches. 30 metres of 10mm² SWA 4-core cable + glands £130 Single-phase 16A socket outlets from £7 (http://chaloncomponents.co.uk/shop/article_GW62477/GW62477.html) Single-phase RCCDOs we have.
Some photos perhaps? Awaiting these.
- Photo of Distribution boards
- Photo of MCBs and 3phase outlets
- Photo of donated cable
Page based on template suggested by Michael Erskine