Myford lathe: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
No edit summary
PhillS (talk | contribs)
→‎Safety: Info on polishing added
 
(21 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{TOC right}}
{{Tool
|image=File:Ml7 Example.jpg
|manufacturer=Myford
|model=Super 7
|obtained=[[/Pledges|Pledge Drive]]
|obtaineddate=22/11/2011
|team=Metalworking
|location=Metalworking Area
|induction=Yes
}}
===History===
===History===
The Myford super 7 lathe arrived at Nottingham hackspace in November 2011 thanks in part to members pledges. <br/>
The Myford super 7 lathe arrived at Nottingham hackspace in November 2011 thanks in part to members pledges. <br/>
Line 10: Line 19:
<br style="clear: both" />
<br style="clear: both" />
=== Pics ===
=== Pics ===
{{#widget:Flickr gallery|mode=photoset|id=72157628119084531}}
{{#widget:Flickr|photoset=72157628119084531}}


==Specification==
==Specification==
Line 31: Line 40:
| Spindle speeds || 14(25-2105rpm)
| Spindle speeds || 14(25-2105rpm)
|-
|-
|  Motor  || Single phase 3/4hp (1450rpm)
|  Motor  || Single phase 1/3hp (1425rpm)
|}
|}


Line 58: Line 67:
==Safety==
==Safety==
'''DO NOT OPERATE THE LATHE UNTILL YOU HAVE BEEN INDUCTED''', see below for details.<br>
'''DO NOT OPERATE THE LATHE UNTILL YOU HAVE BEEN INDUCTED''', see below for details.<br>
As always at the backspace YOU are responsible for your own safety, proper machine operation and safety of those around you.
As always at the Hackspace YOU are responsible for your own safety, proper machine operation and safety of those around you.


Borrowed most of the following from [http://www.mini-lathe.com/Mini_lathe/lathe_safety.htm Mini-lathe.com] & [http://www.lathes.co.uk/page13.html lathes.co.uk] --[[User:Lwk|&#39;RepRap&#39; Matt]]
Borrowed most of the following from [http://www.mini-lathe.com/Mini_lathe/lathe_safety.htm Mini-lathe.com] & [http://www.lathes.co.uk/page13.html lathes.co.uk] --[[User:Lwk|&#39;RepRap&#39; Matt]]
Line 71: Line 80:
* Keep your fingers clear of the rotating work and cutting tools
* Keep your fingers clear of the rotating work and cutting tools
* '''Avoid reaching over the spinning chuck'''
* '''Avoid reaching over the spinning chuck'''
** For filing operations, hold the tang end of the file in your left hand so that your hand and arm are not above the spinning chuck
** Please do not use hand held tools or files on this machine with the spindle switched on. See below for use of emery cloth
* After setting up any turning job, take a moment to pull the job round by hand to check that everything clears
* After setting up any turning job, take a moment to pull the job round by hand to check that everything clears


==Maintenance==
==Polishing/use of emery cloth==


The use of emery cloth for polishing is common practice, but carries a high risk to both machine and operator.
*'''HAND HELP EMERY CLOTH MUST NEVER BE USED''' Please see this link for the HSE recommended method of holding emery tape in a tool holder: https://www.hse.gov.uk/engineering/lathes.htm
*The abrasive dust will mix with any oils and form a grinding paste, which will ruin the slideways. Please clean all slideways thoroughly before AND after polishing.
==Lubrication==
You should always lubricate the Myford Lathe before use.
Here is a handy chart to show where to lubricate. [[File:Myford_Lubrication.pdf|200px|thumb|left|Myford Oiling]]
Note the modern equivalent of Esso Nuto H44 is 32 weight Hydraulic Oil (H32).
Also note the "nipples" are for oil not grease!
==Inductions==
See also: [[/Inductions|Myford Lathe Inductions]]


==[[Myford Lathe/Inductions|Inductions]]==
All members are welcome to undertake a lathe induction, the induction is there to instruct you in the safe usage of the lathe. It will also give you the skills needed to do most of the basic lathe operations.<br/>
All members are welcome to undertake a lathe induction, the induction is there to instruct you in the safe usage of the lathe. It will also give you the skills needed to do most of the basic lathe operations.<br/>
Induction cost £10, to cover cost of materials and lathe maintenance.<br/>
Induction cost £20, to cover cost of materials and lathe maintenance and some to the inductor.<br/>
[[User:Lwk|'RepRap' Matt]] will be holding 1on1 sessions.<br/>
 
More details and sign up table can be found here [[Myford Lathe/Inductions|Inductions]]
'''To book an induction please fill in [https://docs.google.com/forms/d/11Cn8Y4vmnWjj7TVxJYkPtvR0fjt5seOK-RPwSN4DbQA this form]'''
 
===Refresher Video===
This helpful video gives an overview of the features on the Myford Lathe. It does not act as a replacement for the induction but is a useful tool for jogging your memory after you've had an induction. <br>
{{#widget:YouTube|id=GeeeWojtIko|width=640}}
 
==Operation==
 
See also: [[/Operation|Myford Lathe Operation]]


==[[Myford Lathe/Operation|Operation]]==
==Drill & Thread Charts==


See also: [[/drill and thread charts|Drill and Thread Charts]]


[[Category:Tools and Equipment]]
[[Category:Tools and Equipment]]
[[Category:Featured]]
[[Category:Metalwork]]

Latest revision as of 17:20, 4 September 2024

Myford lathe
Manufacturer Myford
Model Super 7
AKA {{{aka}}}
Obtained Pledge Drive (22/11/2011)
Location Metalworking Area
Team Metalworking
Induction Required Yes (use request form)
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}

History

The Myford super 7 lathe arrived at Nottingham hackspace in November 2011 thanks in part to members pledges.
The Myford company started in 1934, was based here in Nottingham (Beston to be exact) and only closed it doors due to liquidation back in July 2011. The ML7 lathe was launched in August 1946, retailing at £34.00 excluding motor. Later replaced by the the Super 7 in April 1953 build around the same design but with number of new features and improvements. Both models have been very successful and often favoured by hobbyists and model engineers.

The Hackspaces Super 7 has been dated to around January 1973.
Pledges

Pics

Specification

Some basic details on the lathe.

Serial Number SK1106001CM
Distance between centres 19" / 482mm
Swing over bed 7" / 117.8mm
Swing over cross slide 4"1/8 / 104mm
Cross slide travel 6"3/8 / 161mm
Top slide travel 2"3/4 / 69mm
Spindle speeds 14(25-2105rpm)
Motor Single phase 1/3hp (1425rpm)

Tooling

We have a wide collection of accessories and tooling to go with the Super 7. See links for pictures.

  • 3 Jaw 4" self centring chuck, most use method for mounting work
  • 4 Jaw 6" Independent chuck [1]
  • 4 Jaw 3"1/2 independent chuck [2]
  • 7" faceplate [3]
  • Driver plate with peg, used to mount work between centres (we need a lathe dog) [4]
  • Angle mounting plate, goes on faceplate to mount work [5]
  • Fixed Steady, used support the end of long work piece [6]
  • Drill Chucks [7]
    • Jacobs No34, 1-13mm
    • Jacobs No36, 5-20mm
    • Unknown make, 4-16mm
  • Centre dills, BS1-BS5
  • Dead Centre [8]
  • Live Centre [9]
  • Vertical Slide, use for milling operations [10]
  • Small machine vice, for mounting on the cross slide or vertical slide [11]
  • Rear tool post, came with original Myford box but missing original spanner [12]
  • HSS Cutters, the lathe arrived with a wide selection [13] [14]

Safety

DO NOT OPERATE THE LATHE UNTILL YOU HAVE BEEN INDUCTED, see below for details.
As always at the Hackspace YOU are responsible for your own safety, proper machine operation and safety of those around you.

Borrowed most of the following from Mini-lathe.com & lathes.co.uk --'RepRap' Matt

  • Always wear eye protection
  • Wear short sleeve shirts, if possible, or shirts with snugly fitting cuffs if long sleeve
    • Loose sleeves can catch on rotating work and quickly pull your hand or arm into harm's way. 'RepRap' Matt has the scar to prove this point!
  • Remove wrist watches, necklaces, chains and other jewellery
  • Tie back long hair so it can't get caught in the rotating work
  • Never, ever, leave a chuck key in a chuck.
    • Get in the habit of removing the chuck key immediately after use
    • Never remove your hand from the chuck key when it is in the chuck
  • Keep your fingers clear of the rotating work and cutting tools
  • Avoid reaching over the spinning chuck
    • Please do not use hand held tools or files on this machine with the spindle switched on. See below for use of emery cloth
  • After setting up any turning job, take a moment to pull the job round by hand to check that everything clears

Polishing/use of emery cloth

The use of emery cloth for polishing is common practice, but carries a high risk to both machine and operator.

  • HAND HELP EMERY CLOTH MUST NEVER BE USED Please see this link for the HSE recommended method of holding emery tape in a tool holder: https://www.hse.gov.uk/engineering/lathes.htm
  • The abrasive dust will mix with any oils and form a grinding paste, which will ruin the slideways. Please clean all slideways thoroughly before AND after polishing.

Lubrication

You should always lubricate the Myford Lathe before use.

Here is a handy chart to show where to lubricate. File:Myford Lubrication.pdf

Note the modern equivalent of Esso Nuto H44 is 32 weight Hydraulic Oil (H32). Also note the "nipples" are for oil not grease!


Inductions

See also: Myford Lathe Inductions

All members are welcome to undertake a lathe induction, the induction is there to instruct you in the safe usage of the lathe. It will also give you the skills needed to do most of the basic lathe operations.
Induction cost £20, to cover cost of materials and lathe maintenance and some to the inductor.

To book an induction please fill in this form

Refresher Video

This helpful video gives an overview of the features on the Myford Lathe. It does not act as a replacement for the induction but is a useful tool for jogging your memory after you've had an induction.

Operation

See also: Myford Lathe Operation

Drill & Thread Charts

See also: Drill and Thread Charts