Yrs3d: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
← Older edit
Chriscain (talk | contribs)
106 edits
No edit summary
 
(22 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{Tool
|image=
|manufacturer=
|model=
|obtained=
|obtaineddate=
|location=
|team=
|induction=
|defunct=yes
|defunctdate=01/01/2014
}}
== YRS 3D Printer Status and Log ==
== YRS 3D Printer Status and Log ==
The YRS 3d printer has been rebuilt and recalibrated and is currently available for inductions and printing to Hackspace members. The print accuracy is to within +/- 0.04mm in X and Y.
The easiest way to get inducted is to put a request on the googlegroup mailing list. Inductions are run for "donations" - what it is worth to the member. Some members are already very familiar with 3D printers, others are not. Donations of PLA or ABS filament in 3mm diameter are also very welcome Members can purchase their own printing supplies - one of the most reputable sources is Faberdashery, the link is at the bottom of the page. PLA is the most environmentally friendly and is a bio-plastic made from sugar.


The YRS 3d Printer is being 'lent'/allowed to be completed by the owners
The YRS 3d Printer is being 'lent'/allowed to be completed by the owners
Line 5: Line 22:
to have a '3d Printer as a tool' available in the space.
to have a '3d Printer as a tool' available in the space.


The YRS printer is basically complete and the build should go fairly quickly
The YRS printer is basically complete and can now be used "Standalone". The next development stages are for it to print in ABS and other materials, to have a quick change option for changing materials, and to have a Flex3drive mechanism added to improve maximum printing speed.
the hackspace printer will require (at least) Electonics, and possibly other bits.
----
== YRS Build Log NEWEST AT TOP ==
 
Box of remaining parts tidied.
All non YRS 3d Parts (i.e. hackspace reprap parts) moved to shelf to
try and help with keeping things in order.
Only major bits left for fitting are hotbed, hot end and the electronics.
chris 26 Dec
 
 
Extruder built 26/dec chris
X carriage movement a bit stiff, a couple of tries using washers/spacers to make it run better
it now moves reasonably, further adjustment may be needed once the electronics/motors are connected and under power testing can be done.
 
X assembly built and fitted
 
 
X Smooth rods too long (length for non LM8 X ends)
Cut down by 15mm to 435mm
 
Z motors added with coupling rods - motors not screwed in place
notes on web seem to indicate that it may be better to not screw these down but
to use tie wraps to hold them in place and redude out of alignment rough spots/vibration.
 
X-end idler was broken
New part printed
 
== Next steps ==
=== Build Extruder ===
 
Completed.
Extruder all built and placed on x carriage, not screwed down yet
as need to check hot end fit/alignment etc.
 
=== Build Hot end ===
 
All Done. Opon examination of the hot end bag it turned out that the hot end came pre-built
all looks in good shape, ready for mounting.
Not mounted yet as it is a bit fragile and probaly needs to be done after alignment/coarse testing of movement.
 
=== Fit Extruder/hot end ===
 
=== Build bed (heated plate etc) ===
Sorted all the parts.
 
It looks like the supplied bolts require all the heated bed hols to be redrilled larger
these holes are very close to the corners !
 
Decided to have a check/think before madly drilling bigger holes.
 
=== Electonics ===
 
All checked (as in stock checked :-) ) and complete
this is probably next step now to allow some motion testing
the X - axis is still stiff/catching and may need some more work
unless it frees up under power.
 
=== Wire up ===
 
=== Functional testing and coarse alignment ===
 
=== Commissioning ===


=== Calibration / fine alignment ===
Build log available in older versions of this page - for further information on using 3D printers in the Hackspace, please go to this page;-


= Useful Links =
https://wiki.nottinghack.org.uk/wiki/3D_Printer


[http://reprap.org/wiki/Prusa_Mendel_Build_Manual Build Manual]
[[Category:Tools_and_Equipment]]

Latest revision as of 18:46, 13 March 2019

Yrs3d  (defunct)
[[|border|frameless|220px|center]]
Manufacturer
Model
AKA {{{aka}}}
Obtained
Location [[]]
Team Tools
Induction Required
Booking {{{booking}}}
Status Defunct (01/01/2014)
Tools:   all pages • list • Power Tools • Broken tools     {{}}


YRS 3D Printer Status and Log

The YRS 3d printer has been rebuilt and recalibrated and is currently available for inductions and printing to Hackspace members. The print accuracy is to within +/- 0.04mm in X and Y.

The easiest way to get inducted is to put a request on the googlegroup mailing list. Inductions are run for "donations" - what it is worth to the member. Some members are already very familiar with 3D printers, others are not. Donations of PLA or ABS filament in 3mm diameter are also very welcome Members can purchase their own printing supplies - one of the most reputable sources is Faberdashery, the link is at the bottom of the page. PLA is the most environmentally friendly and is a bio-plastic made from sugar.

The YRS 3d Printer is being 'lent'/allowed to be completed by the owners the ail is to complete this and then finish the Hackspace owned printer to have a '3d Printer as a tool' available in the space.

The YRS printer is basically complete and can now be used "Standalone". The next development stages are for it to print in ABS and other materials, to have a quick change option for changing materials, and to have a Flex3drive mechanism added to improve maximum printing speed.

Build log available in older versions of this page - for further information on using 3D printers in the Hackspace, please go to this page;-

https://wiki.nottinghack.org.uk/wiki/3D_Printer

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Yrs3d&oldid=19936"