Difference between revisions of "Laser Etching Stainless Steel"
Jump to navigation
Jump to search
m (Danspencer101 moved page Project:Laser Etching Stainless Steel to Laser Etching Stainless Steel over redirect) |
m |
||
Line 7: | Line 7: | ||
|created=24/03/2016 | |created=24/03/2016 | ||
|status=Complete | |status=Complete | ||
+ | |type=member | ||
}} | }} | ||
Revision as of 11:20, 7 February 2019
Laser Etching Stainless Steel | |
---|---|
Primary Contact | Michael Erskine |
Created | 24/03/2016 |
Status | Complete |
Type | Members Project |
QR code |
Tests of laser etching stainless steel using the alcohol and plaster process.
I was compelled to attempt this hack found on Hackaday: http://hackaday.com/2014/12/25/laser-etch-stainless-with-only-plaster-alcohol/
Using cheap stainless steel hip flasks and a lasered jig to hold the flask in exact position with respect to a known origin, I worked out a good process running a very slow etch. Two etches were done on the first hip flask at different rates: one for the lettering and one for the large image. The etch time for the image was over an hour!