Difference between revisions of "Tools/We Have/Power Tools"
Jump to navigation
Jump to search
(update angle grind) |
|||
Line 11: | Line 11: | ||
! Comments | ! Comments | ||
! Looks Like | ! Looks Like | ||
+ | ! Purchased | ||
|- | |- | ||
− | | [[Fobco Bench Drill]] || 1 || n/a || || [[Metalworking Area]] || || [[File:Nottinghack_Tools_Fobco bench drill.jpg |x60px|Fobco Bench Drill]] | + | | [[Fobco Bench Drill]] || 1 || n/a || || [[Metalworking Area]] || || [[File:Nottinghack_Tools_Fobco bench drill.jpg |x60px|Fobco Bench Drill]] || Unknown |
|- | |- | ||
− | | [[Myford lathe|Myford Super 7 Lathe]] || 1 || || N || [[Metalworking Area]] || || [[Image:Nottinghack_Tools_Myford lathe.jpg |x60px|Myford Lathe]] | + | | [[Myford lathe|Myford Super 7 Lathe]] || 1 || || N || [[Metalworking Area]] || || [[Image:Nottinghack_Tools_Myford lathe.jpg |x60px|Myford Lathe]] || Unknown |
|- | |- | ||
− | | [[Denford Lathe]] || 1 || || N || [[CNC Area]] || || [[Image:WDenfordNovaturn.JPG | x60px |Denford Lathe]] | + | | [[Denford Lathe]] || 1 || || N || [[CNC Area]] || || [[Image:WDenfordNovaturn.JPG | x60px |Denford Lathe]] || Unknown |
|- | |- | ||
− | | [[Wood lathe]] || 1 || Faceplates, Chucks || N || [[Dusty Area]] || Chinese model similar to [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] || [[Image:Tool Wood Lathe.jpg|x60px|Wood Lathe]] | + | | [[Wood lathe]] || 1 || Faceplates, Chucks || N || [[Dusty Area]] || Chinese model similar to [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] || [[Image:Tool Wood Lathe.jpg|x60px|Wood Lathe]] || Unknown |
|- | |- | ||
− | | [[Donkey Saw]] || 1 || || N || [[Metalworking Area]] || Rapidor || [[Image:Nottinghack_Tools_Rapidor donkey saw.jpg | x60px |Donkey Saw]] | + | | [[Donkey Saw]] || 1 || || N || [[Metalworking Area]] || Rapidor || [[Image:Nottinghack_Tools_Rapidor donkey saw.jpg | x60px |Donkey Saw]] || Unknown |
|- | |- | ||
| [[ARC welder]] || 1 || || N || [[Metalworking Area]] || Olympic Bantam || [[Image:Arc_Olympic_Bantam.jpg | x60px |ARC Welder]] | | [[ARC welder]] || 1 || || N || [[Metalworking Area]] || Olympic Bantam || [[Image:Arc_Olympic_Bantam.jpg | x60px |ARC Welder]] | ||
Line 31: | Line 32: | ||
|- | |- | ||
| Twin 6" Grinding Wheel || 1 || || N || MB || Parkside PDOS200A1 2950rpm || | | Twin 6" Grinding Wheel || 1 || || N || MB || Parkside PDOS200A1 2950rpm || | ||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| 24V Cordless Hammer Drill || 1 || N/A || N || TC || Challenge Pro || [[File:Nottinghack_Tools_Power_Drills.jpg | thumb | 100px | Right]] | | 24V Cordless Hammer Drill || 1 || N/A || N || TC || Challenge Pro || [[File:Nottinghack_Tools_Power_Drills.jpg | thumb | 100px | Right]] | ||
Line 102: | Line 99: | ||
| Dremel Rotary Tool || 2 || N/A || N || TC || || [[File:Nottinghack_Tools_The_Dremel_Collection.jpg | thumb | 100px ]] | | Dremel Rotary Tool || 2 || N/A || N || TC || || [[File:Nottinghack_Tools_The_Dremel_Collection.jpg | thumb | 100px ]] | ||
|- | |- | ||
− | | Metal Cut-off Saw || 1 || || N || MB || Stayer TF84 225mm 85rpm || | + | | Metal Cut-off Saw || 1 || || N || MB || Stayer TF84 225mm 85rpm || - || Unknown |
+ | |- | ||
+ | | Metal Chop Saw || 1 || || N || W || De Walt (LTL) || - || Unknown | ||
|- | |- | ||
− | | | + | | 100A Arc Welder? || 1 || || N || MB || Draper 87939? || - || Unknown |
|- | |- | ||
− | | | + | | BOSCH GWS 7-115 115MM ANGLE GRINDER || 2 ||cutting discs, brushes|| ? || || [https://www.campbellmillertools.co.uk/power-tools/corded-power-tools/angle-grinders/bosch-gws7-115-115mm-angle-grinder-240v-0601388174-0601388171 Supplier] || || April 2017 |
− | |||
|} | |} | ||
Line 117: | Line 115: | ||
! Consumables? | ! Consumables? | ||
! More? | ! More? | ||
− | |||
! Comments | ! Comments | ||
− | ! | + | ! Purchased |
+ | ! Defunct | ||
+ | |- | ||
+ | | [[Hitachi Drill Driver|Hitachi DS14DVC 14.4V 1250rpm]] || 2 || Driver Bits || ||Cordless Drill / Driver (defunct) || | ||
+ | |- | ||
+ | | [[Hitachi Drill Driver|Hitachi DV14DVC2 14.4V 1500rpm]] || 2 || Driver Bits || N || Cordless Hammer Drill / Driver (defunct) || | ||
|- | |- | ||
− | | | + | | <del>Hot air gun</del> || 0 || N/A || Y || Failed and scrapped / Jan 13 || Unknown || Unknown |
|- | |- | ||
− | | | + | | 115mm Angle Grinder || 0 || cutting discs || - || Gearbox stripped - Replacement to be obtained || Unknown || August 2015 |
|- | |- | ||
− | | | + | | 100mm Angle Grinder || 1 || cutting discs || N || TC || Stayer SA100 450W 10Krpm || Unknown || Unknown |
|- | |- | ||
− | | | + | | 230mm Angle Grinder || 1 || cutting discs || N || TC || Ferm FAG-230 1550W 6000rpm || Unknown || Unknown |
|} | |} | ||
[[Category:Tools and Equipment]] | [[Category:Tools and Equipment]] |
Revision as of 11:59, 11 July 2019
Information on this page is out of date. The specific problem is: List 2 to 3 years out of date. Please help update the page if you can. The talk page may contain suggestions. (March 2019) |
List of Power Tools we have:
Tool | Quantity | Consumables? | More? | Location | Comments | Looks Like | Purchased |
---|---|---|---|---|---|---|---|
Fobco Bench Drill | 1 | n/a | Metalworking Area | ![]() |
Unknown | ||
Myford Super 7 Lathe | 1 | N | Metalworking Area | ![]() |
Unknown | ||
Denford Lathe | 1 | N | CNC Area | Unknown | |||
Wood lathe | 1 | Faceplates, Chucks | N | Dusty Area | Chinese model similar to Charnwood 813 | ![]() |
Unknown |
Donkey Saw | 1 | N | Metalworking Area | Rapidor | ![]() |
Unknown | |
ARC welder | 1 | N | Metalworking Area | Olympic Bantam | ![]() | ||
Kity Table Saw | 1 | N | Dusty Area | Série 8 819 | ![]() | ||
MIG Welder | 1 | N | MB | Sealy MightyMIG 120XT mkII | |||
Power Washer | Y | ||||||
Twin 6" Grinding Wheel | 1 | N | MB | Parkside PDOS200A1 2950rpm | |||
24V Cordless Hammer Drill | 1 | N/A | N | TC | Challenge Pro | ||
Mains Hammer Drill | 1 | N/A | N | TC | Performance Power 710W | ||
Classic B&D Drill + Stand | 1 | N/A | N | WB | B&D DNJ70B 370W | ||
Router and Table | 1 | Router Bits | N | TC | Powercraft PBF-1200 1200W 9-30Krpm 6mm, 8mm collets | ||
Biscuit Jointer | 1 | Biscuits | N | TC | Powercraft 850W | ||
Power Plane | 1 | N | TC | ||||
Air Compressor | 1 | N/A | N | TC | Direct Power | ||
Air Nailer & Stapler | 1 | Nails & Staples | N | TC | Parkside PDT40A1 | ||
Cordless Hammer Drill / Driver | 1 | Driver Bits | N | Direct Power TP18CD 18V 1300rpm | |||
Mouse Sander | 1 | Large Mouse Sheets | N | TC | Bosch PSM80A | ||
Detail Sander | 1 | Small Mouse Sheets | N | TC | Bosch PDA120E | ||
Detail Sander | 1 | Small Mouse Sheets | N | TC | Challenge MS3467 | ||
Belt Sander | 1 | Sanding Belts | N | TC | |||
Belt / Disc Sander | 1 | Belts and Discs | N | W | |||
Bench Disc Sander | 1 | Discs | N | W | Record Power 300mm disc | ||
Finishing Sander | 1 | Sanding Sheets | N | TC | Ferm VM-150 135W 1/3 sheet | ||
Orbital Sander | 1 | Sanding Sheets | N | TC | Powercraft S1A-AK2J8-125TB 420W 125mm | ||
Circular Saw | 1 | N/A | N | WS | Performance Power FMTC184SFD 1200W 184mm | ||
210mm Cutoff Saw | 1 | N/A | N | WB | Challenge MMS0649 1200W | ||
(Cutoff Saw) | 1 | N | Ferm FKZ-205 (in box) | ||||
Band Saw | 1 | 56 1/2" Blades | N | W | Schneider SCH190 250W 1500rpm | ||
10" Table Saw | 1 | N | Performance Power 1500W 5700rpm | ||||
(Saw Bench) | 1 | N | Ferm FZB-720 (in box) | ||||
Bench Drill (+ machine vice) | 1 | N/A | N | WB | Wickes 250W | ||
Radial arm pillar drill | 1 | N/A | N | W | Sealey GDM1630FR | ||
Jigsaw | 1 | blades | N | TC | Bosch PST650 500W 3100rpm | ||
Jigsaw | 1 | blades | N | TC | B&D KS630 370W 3200rpm | ||
Jigsaw | 1 | blades | N | TC | B&D KS888E 500W 3200rpm | ||
Jigsaw | 1 | blades | N | TC | Ryobi EJS-500 400W 2600rpm | ||
Shop vac | 6 | N | W | We have 2 Henries (red), Kerstar (blue) and Hoover (green) as well as a Vax (orange) plus a Dyson | |||
Small glue gun | 1 | Small glue sticks | N | SR | |||
Large glue gun | 1 | Large glue sticks | N | SR | |||
Dremel Rotary Tool | 2 | N/A | N | TC | |||
Metal Cut-off Saw | 1 | N | MB | Stayer TF84 225mm 85rpm | - | Unknown | |
Metal Chop Saw | 1 | N | W | De Walt (LTL) | - | Unknown | |
100A Arc Welder? | 1 | N | MB | Draper 87939? | - | Unknown | |
BOSCH GWS 7-115 115MM ANGLE GRINDER | 2 | cutting discs, brushes | ? | Supplier | April 2017 |
Defunct
Tool | Quantity | Consumables? | More? | Comments | Purchased | Defunct | |
---|---|---|---|---|---|---|---|
Hitachi DS14DVC 14.4V 1250rpm | 2 | Driver Bits | Cordless Drill / Driver (defunct) | ||||
Hitachi DV14DVC2 14.4V 1500rpm | 2 | Driver Bits | N | Cordless Hammer Drill / Driver (defunct) | |||
0 | N/A | Y | Failed and scrapped / Jan 13 | Unknown | Unknown | ||
115mm Angle Grinder | 0 | cutting discs | - | Gearbox stripped - Replacement to be obtained | Unknown | August 2015 | |
100mm Angle Grinder | 1 | cutting discs | N | TC | Stayer SA100 450W 10Krpm | Unknown | Unknown |
230mm Angle Grinder | 1 | cutting discs | N | TC | Ferm FAG-230 1550W 6000rpm | Unknown | Unknown |