DIY Laser/Frame: Difference between revisions
Jump to navigation
Jump to search
m Danspencer101 moved page Project:DIY Laser/Frame to DIY Laser/Frame over redirect |
No edit summary |
||
| Line 1: | Line 1: | ||
{{ | {{Archive|date=January 2013}} | ||
Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. | Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. | ||
Latest revision as of 00:07, 20 February 2019
 |
The information on this page is NOT current. It retained for historical or archival purposes only. (January 2013) |
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.