Industrial Overlocker: Difference between revisions
Seperate tool page |
info box |
||
| Line 1: | Line 1: | ||
{{Tool | |||
|image=File:Willcox_Gibbs_500-4_Type_516-4-38_Studio.jpg | |||
|manufacturer=Willcox & Gibbs | |||
|model=500-4 Type 516-4-38 | |||
|obtained= | |||
|obtaineddate= | |||
|location=Textiles Workshop | |||
|team=Craft & Textiles | |||
|induction=No | |||
|defunct= | |||
|defunctdate= | |||
}} | |||
'''Please seek assistance on the Google Group if you do not know how to operate this machine.''' Training is not mandatory but is recommended. Rethreading this takes an awfully long time. | '''Please seek assistance on the Google Group if you do not know how to operate this machine.''' Training is not mandatory but is recommended. Rethreading this takes an awfully long time. | ||
This is a Willcox & Gibbs 500-4 Type 516-4-38. There is a manual available in the drawer - this should be photocopied later. The type number relates to how to thread it which is in the manual. There are some coloured guides on the machine in paint - not yet fully accurate but certainly "good enough". | This is a Willcox & Gibbs 500-4 Type 516-4-38. There is a manual available in the drawer - this should be photocopied later. The type number relates to how to thread it which is in the manual. There are some coloured guides on the machine in paint - not yet fully accurate but certainly "good enough". | ||
Please mind not to change the tension, there is no need to unless you know what you are doing. | Please mind not to change the tension, there is no need to unless you know what you are doing. | ||
Revision as of 12:22, 22 February 2019
| Industrial Overlocker | |
|---|---|
 | |
| Manufacturer | Willcox & Gibbs |
| Model | 500-4 Type 516-4-38 |
| Location | Textiles Workshop |
| Team | Craft & Textiles |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
Please seek assistance on the Google Group if you do not know how to operate this machine. Training is not mandatory but is recommended. Rethreading this takes an awfully long time.
This is a Willcox & Gibbs 500-4 Type 516-4-38. There is a manual available in the drawer - this should be photocopied later. The type number relates to how to thread it which is in the manual. There are some coloured guides on the machine in paint - not yet fully accurate but certainly "good enough".
Please mind not to change the tension, there is no need to unless you know what you are doing.
The thread is setup with 5 bobbins. These can be easily re-threaded between black or white or whatever you bring if you tie on the new thread and pull the old one through.
When using it make sure to have the fabric as shown:
Then when finished keep the motor going to get a good amount of threaded material to cut. DO NOT PULL IT THROUGH, UNLIKE THE SEWING MACHINE THIS WILL CAUSE IT TO SNAP THREADS AND WILL REQUIRE RETHREADING.
