SE-CNC-1

SE-CNC-1
Manufacturer	Custom Built
Model	SE-CNC-1
AKA	{{{aka}}}
Obtained	Under Discussion
Location
Team	Not maintained by space.
Induction Required	Planned
Booking	{{{booking}}}
Status	Defunct
Risk Assessment	Yes, see [[{{{riskassessment}}}|the assessment]]
Tools:   all pages • list • Power Tools • Broken tools     {{}}

This is a large 3 Axis CNC Mill owned by a Member been offered as a Long Term Loan to the space and was discussed in the 2019-03-06 Members Meeting. It was agreed that the donation would be accepted and the tool would be brought in for the enclosure to be built.

Points to note:

• The Tool will require an induction.
• It will bookable, but not charged for.
• Anyone using the tool will be expected to bring their own tooling.
• Any additional funds required to build the enclosure must be sourced through a Pledge Drive, not paid for by the space.
• The tool will be located in the Downstairs metalworking area.

Machine Specs

Axis	Footprint(mm)	Travel(mm)	Ballscrews	Rails
X	1020	500	2 * 1610	2 * THK SHS25V / 4 blocks / 760mm
Y	1000	450/500*	1 * 1610	2 * HIWIN EGW15CAH / 4 blocks / 540mm
Z	1000	100	1 * 1605	2 * THK SR25V / 4 blocks

Spindle	80mm / 2.1kW / 24000rpm
VFD	Hyunyang HY02D223B 2.2kW
Motors	Nema23 3Nm @ 2:1 pulley ratio
Motor Drivers	4 * Leadshine DM860 @ 70V
Controller Hardware	Intel D945GCLF2
Controller Software	LinuxCNC

See Also

https://sklv.me/post/secnc1.html