Old Mini Mill
| Old Mini Mill (defunct) | |
|---|---|
 | |
| Manufacturer | OSAKI |
| Model | MMD250 |
| Location | Removed from the space |
| Team | Tools |
| Induction Required | No |
| Status | Defunct (November 2016) |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
NO LONGER AVAILABLE. This tool has been removed from Nottinghack, and donated to another Hackspace as its function is replaced by another benchtop milling machine from the Barnsley collection.
This is a bench-top OSAKI MMD250 milling machine received as a donation (was being scrapped!)
Looks Like
Specification
This is an 'X2' mini mill, intended for DIY use, available under a number of different supplier identities. This particular one is supplied by Cromwell Tools
A copy of the user manual is available in the Hackspace, or can be downloaded.
Tooling
There is a 6mm solid carbide end mill. Other suitable tools may be found in the Bridgeport Mill area.
Safety
Do not, ever, use an ordinary Jacobs-type drill chuck to hold milling tools. There is a set of 3 collet chucks with a (home-made) drawbar which is a much more secure and safe way of holding such tools (a drill-chuck is fine when the operating force is along the axis, but will loosen dangerously if sideways forces are applied).
Issues
The spindle speed is not stable - this is a known problem with this particular kind of mill. May need attention to the speed control pot, or a replacement controller.