Laser Etching Stainless Steel

Laser Etching Stainless Steel
[[{{{image}}}|border|frameless|220px|center]]
Primary Contact	Michael Erskine
Created	24/03/2016
Completed	{{{completeddate}}}
Dormant	{{{dormantdate}}}
Version	{{{version}}}
Members	{{{members}}}
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	Complete
Type	Members Project
Live Status	{{{livestatus}}}
QR code

Tests of laser etching stainless steel using the alcohol and plaster process.

• 
  First two etchings on one hip flask

I was compelled to attempt this hack found on Hackaday: http://hackaday.com/2014/12/25/laser-etch-stainless-with-only-plaster-alcohol/

Using cheap stainless steel hip flasks and a lasered jig to hold the flask in exact position with respect to a known origin, I worked out a good process running a very slow etch. Two etches were done on the first hip flask at different rates: one for the lettering and one for the large image. The etch time for the image was over an hour!