Pantograph Engraving Machine

Pantograph Engraving Machine
Manufacturer	Rank-Taylor-Hobson
Model	Model D
Serial Number	{{{serial}}}
AKA	{{{aka}}}
Obtained	Pledge Drive (01/02/2019)
Location	Metalworking Area
Team	Metalworking
Induction Required	No
Booking	{{{booking}}}
Status	Defunct
Risk Assessment	Yes, see [[{{{riskassessment}}}|the assessment]]
Tools:   all pages • list • Power Tools • Broken tools     {{}}

Images

• 
  Engraving Machine Front View
• 
  Picture of Existing Gravograph Templates
• 
  Side View. Note for scale, the machine stands about 4 feet tall

Letter Templates

The letter templates are stored in the grey drawer under the bench between the Engraver and the mini mill, labelled "Engraver Letters"

Power

Rating Plate

Fed from a 16amp 3 Phase supply

The Pantograph Engraving Machine shares a 3 phase socket with the Bridgeport Mill. It is located on the ceiling. The Bridgeport Mill should be plugged in by default.