Silvertail A0 Laser cutter
 |
This tool requires induction. Please request via this form. Note, induction costs £20. |
| Silvertail A0 Laser cutter | |
|---|---|
 | |
| Manufacturer | Just Add Sharks |
| Model | Silvertail A0 |
| Obtained | Purchased through Pledge Drive early 2014 |
| Location | Laser Area |
| Team | Laser |
| Induction Required | Yes (use request form) |
| Booking | Yes (use HMS) |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
The Silvertail A0 Laser cutter is the main laser cutter the Hackspace owns. It requires both induction and booking / paying for use. See the Laser cutter page for usage instructions (LaserCut) and for information on inductions and bookings.
A0 Specific Information
What's the same as the Greyfin A2 Laser Cutter:
- The password for the new PC (Log in using the "Laser-User" account)
- Lasercut 5.3 software
- Control panel on the laser
- Cost to use (£3 / hour)
- Bookable via HMS, limited to one 2 hour slot
- Access controlled by RFID card reader
- Maximum power setting 65% to extend laser tube life
Differences to the Greyfin A2 Laser Cutter are:
- The hackspace owns this laser cutter
- It has a 1200 x 900 mm (approx A0) cutting area, ideal for larger jobs
- Power is 80W so if you use it compared to the A2 use the whiteboard speeds
- Focus tool is larger
- It has a red aiming dot
- The extractor is now shared by both lasers. It comes on when the first laser turns on, and switches off 60 seconds after the last laser turns off
- If you have any laser time credits (from the original pledge drive for the A0 or a recent induction) for the time being this can only be used on the A0 laser not the A2 laser