Pantograph Engraving Machine

Pantograph Engraving Machine
Manufacturer	Rank-Taylor-Hobson
Model	Model D
AKA	{{{aka}}}
Obtained	Pledge Drive (01/02/2019)
Location	Metalworking Area
Team	Metalworking
Induction Required	No
Booking	{{{booking}}}
Status	Defunct
Tools:   all pages • list • Power Tools • Broken tools     {{}}

Images

• 
  Engraving Machine Front View
• 
  Picture of Existing Gravograph Templates
• 
  Side View. Note for scale, the machine stands about 4 feet tall

Manual

The manual can be found here: Media:Taylor_Hobson_Engraver_manual.pdf

Letter Templates

The letter templates are stored in the grey drawer under the bench between the Engraver and the mini mill, labelled "Engraver Letters"

Power

Rating Plate

Fed from a 16amp 3 Phase supply

The Pantograph Engraving Machine shares a 3 phase socket with the Bridgeport Mill. It is located on the ceiling. The Bridgeport Mill should be plugged in by default.