Difference between revisions of "SE-CNC-1"
Jump to navigation
Jump to search
(Round-up Members meeting) |
|||
| Line 11: | Line 11: | ||
|defunctdate= | |defunctdate= | ||
}} | }} | ||
| + | This is a large 3 Axis CNC Mill owned by a Member been offered as a Long Term Loan to the space and was discussed in the [[2019-03-06_Agenda|2019-03-06 Members Meeting]]. It was agreed that the donation would be accepted and the tool would be brought in for the enclosure to be built. | ||
| + | |||
| + | Points to note: | ||
| + | *The Tool will require an induction. | ||
| + | *It will bookable, but not charged for. | ||
| + | *Anyone using the tool will be expected to bring their own tooling. | ||
| + | *Any additional funds required to build the enclosure must be sourced through a Pledge Drive, not paid for by the space. | ||
| + | *The tool will be located in the [[Downstairs]] metalworking area. | ||
| − | |||
==Machine Specs== | ==Machine Specs== | ||
Revision as of 15:35, 7 March 2019
| SE-CNC-1 | |
|---|---|
 | |
| Manufacturer | Custom Built |
| Model | SE-CNC-1 |
| Obtained | Under Discussion |
| Team | Not maintained by space. |
| Induction Required | Planned |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
This is a large 3 Axis CNC Mill owned by a Member been offered as a Long Term Loan to the space and was discussed in the 2019-03-06 Members Meeting. It was agreed that the donation would be accepted and the tool would be brought in for the enclosure to be built.
Points to note:
- The Tool will require an induction.
- It will bookable, but not charged for.
- Anyone using the tool will be expected to bring their own tooling.
- Any additional funds required to build the enclosure must be sourced through a Pledge Drive, not paid for by the space.
- The tool will be located in the Downstairs metalworking area.
Machine Specs
| Axis | Footprint(mm) | Travel(mm) | Ballscrews | Rails |
|---|---|---|---|---|
| X | 1020 | 500 | 2 * 1610 | 2 * THK SHS25V / 4 blocks / 760mm |
| Y | 1000 | 450/500* | 1 * 1610 | 2 * HIWIN EGW15CAH / 4 blocks / 540mm |
| Z | 1000 | 100 | 1 * 1605 | 2 * THK SR25V / 4 blocks |
| Spindle | 80mm / 2.1kW / 24000rpm |
|---|---|
| VFD | Hyunyang HY02D223B 2.2kW |
| Motors | Nema23 3Nm @ 2:1 pulley ratio |
| Motor Drivers | 4 * Leadshine DM860 @ 70V |
| Controller Hardware | Intel D945GCLF2 |
| Controller Software | LinuxCNC |