Kinect: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(4 intermediate revisions by one other user not shown)
Line 12: Line 12:
This camera at first glance may be dismissed as just a gaming device. Its definitely not!  
This camera at first glance may be dismissed as just a gaming device. Its definitely not!  
It has a variety of uses when plugged into a PC or Laptop and is actually quite easy to use.  
It has a variety of uses when plugged into a PC or Laptop and is actually quite easy to use.  




Line 25: Line 23:


===3D Scanning===
===3D Scanning===
 
{{also|3D scanning yourself}}
Once you have installed all the drivers the camera can be used to produce 3D Printable STL files of anything you can get a good scan of.  
Once you have installed all the drivers the camera can be used to produce 3D Printable STL files of anything you can get a good scan of.  
Phill and I were able to get very good scans of our heads by sitting on office chairs in the studio area and slowly spinning on the spot.


The software used to produce the scans is called [[Skanect]]. There are lots of videos on youtube showing how to use it but it is generally pretty self explanatory.
The software used to produce the scans is called [[Skanect]]. There are lots of videos on youtube showing how to use it but it is generally pretty self explanatory.
Line 34: Line 31:
Get the software here:
Get the software here:
https://skanect.occipital.com/download/
https://skanect.occipital.com/download/
[[File:Kinect Scan.gif|none|3D Scan of Danspencer101]]
[[File:Kinect2.PNG|350px|none|Skanect Program]]
[[File:Kinect3.jpg|350px|none|Camera setup in the studio room]]
[[File:Kinect4.PNG|800px|none|Scan of my head]]
[[File:Dans Head.gif|none|3D Printed]]


===Other Uses===
===Other Uses===
Line 48: Line 39:


[[Category:Tools_and_Equipment]]
[[Category:Tools_and_Equipment]]
[[Category:Printers and scanners]]

Latest revision as of 08:36, 11 May 2019

Kinect
Manufacturer Microsoft
Model Xbox360 Kinect
AKA {{{aka}}}
Obtained Purchased through Pledge Drive
Location Comfy Area
Team Tools
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}


Xbox 360 Kinect

This camera at first glance may be dismissed as just a gaming device. Its definitely not! It has a variety of uses when plugged into a PC or Laptop and is actually quite easy to use.


Installing the Camera on Windows

For the specific camera that the hackspace owns, you must download and install Kinect for Windows SDK v1.7

It can be found on the microsoft website here: http://www.microsoft.com/en-gb/download/details.aspx?id=36996


3D Scanning

Once you have installed all the drivers the camera can be used to produce 3D Printable STL files of anything you can get a good scan of.

The software used to produce the scans is called Skanect. There are lots of videos on youtube showing how to use it but it is generally pretty self explanatory. When exporting the STL files for 3D printing you will notice that there is a 5000 face limit on the Free version of skanect. The files are still perfectly useable so don't worry about it too much unless you are targeting perfect scans and have access to a Resin/ DLP 3D printer.

Get the software here: https://skanect.occipital.com/download/

Other Uses

  • I believe you can use this for animating models and tracking motion
  • Gaming
  • Many others...